Towing Mirrors Made in The USA That Fit a 2007 Chevrolet Silverado New Body

Question

Question:

I dont suppose these mirrors are made in the USA?

asked by: Allen R

0

Expert Reply:

I spoke with my contact at K-Source, and they stated that the towing mirrors, like the KS62077-78G you referenced, are not manufactured in the United States.

Instead we offer the CIPA Custom Towing Mirrors that are made in the United States, and fit your 2007 Silverado New Body. The mirror for the driver side is part # 10901. The mirror for the passenger side is part # 10902. These require no tools for installation and slip over the existing mirrors on your Silverado. I have linked you to the installation video for this option.

expert reply by: Jeffrey L

0

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hi Bruce, To lift your trailer we'll first need to check of the suspension and see if you have torsion axles or a leaf spring suspension. If you have torsion axles then I'll need to see the axle tag in order to determine what you have so I…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

The Dometic RV Water Heater - Gas - Automatic Pilot - 12 Volt - 8,800 Btu - 6 Gal Tank Item AT96121 is the direct replacement for the GC6AA-10E. Unfortunately it is out of stock with no expected restock date. Instead I recommend the Furrion RV…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

The "KTC 7600" stamped on the brake pad doesn't look to be a part number, so I can't cross reference it, but we do know you have Kodiak ceramic brake pads. So to determine the correct brake pads, all you need to do is match up…

view full answer...

Answer 10

While we do not carry that particular Lippert step we do have the similar MORryde #MR98RR or a better option in my opinion is the TorkLift GlowStep #TLA9104. I prefer this step as it folds up nicely and works better in tight areas like storage lots.…

view full answer...

Answer 11

Yes, you will. The longer length of the K-Source Custom Extendable Towing Mirrors item #KS62147-48G over the factory mirrors requires you to drill an extra hole for an additional support. These mirrors are confirmed to fit your 2018 Chevy Silverado…

view full answer...

Answer 12

David, it sounds like you're looking for the K-Source Snap & Zap Custom Towing Mirrors #KS80900. As long as your Sierra does not have chrome caps or telescoping side mirrors, these'll work perfect for you. If you have any other questions…

view full answer...