Lift Kit and Cushioned Equalizer For a 2022 Kaufman 7' X 14' Enclosed Trailer

Question

Question:

We have a new 2022 Kaufman 7x14 Enclosed with tandem axels, now built out by wife and I Total weight now 3300lbs. The axels are marked 3.5K Dexter springs and as I am desperately needing a little height from ground please help me determine a 2 increase. I ALSO think Id like to improve ride with an equalizer but dont understand eye reference in literature. As wife and I are seniors and first time trailer owners please help us to ID correct upgrades for a local shop to modify for us. THANK YOU.

asked by: Patrick M

0

Expert Reply:

The Correct Track Trailer Alignment and Lift Kit # RR23QX contains all the parts needed to raise your leaf sprung axles on your 2022 Kaufman 7'x14' enclosed trailer 1-1/4" or 2-1/4". This can also be used to adjust your axles and ensure they are aligned correctly on your trailer. I have linked the installation instructions below so you can see how these work to raise and align your trailer axles.

For a cushioned equalizer the Dexter E-Z Flex Suspension Kit # K71-652-00 will likely be the one you need. The eye reference is based on the distance from the center of hole on the front shackle to the center of hole on the rear shackle of the equalizer. This one is designed for replacing a Curved Equalizer # TREQ104 that is 5-3/4" from center of front hole to center of rear hole. If you have a different style or length equalizer please send me the measurement of your equalizer and I can help find the correct one for your application.

expert reply by: Bud M

0

Answer 1

I spoke to my contact at Dexter and he informed me that they recommend greasing the E-Z Flex equalizers every three months or 3,000 miles. I also attached a pretty helpful guide to how often trailer components should be maintained. For grease Dexter…

view full answer...

Answer 2

You shouldn't loose any wheel clearance with the Dexter E-Z Flex Suspension Kit. First you will want to see which of the Equalizers you need. There is a 6,000lb Equalizers #K71-654-00 (5-5/8") and 8,000lb Equalizers #K71-655-00…

view full answer...

Answer 3

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 4

Finding the correct MORryde equalizer kit will be pretty specific, so I cannot tell you which will be correct without knowing the wheel spacing and axle capacity, unfortunately. With that being said, if you have the trailer's VIN, you may be able…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...

Answer 7

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 8

For a single axle trailer, you want the shackle strap to be able to move so that you have the spring deflection needed for your suspension. Angled like the photo or even almost vertical is fine you just don't want the shackle strap to bind and…

view full answer...

Answer 9

I contacted MORryde and this does happen from time to time as the weight of the trailer can spread out the axles due to downward pressure on the springs/suspension. Odds are the 35" wheel base #MR27ZR will be the correct one for you, but they…

view full answer...

Answer 10

I have attached for you below some common torque values needed for a trailer suspension system but a lot of these will vary by bolt size and other factors. U-Bolts: Varies by Size - 1/2" bolts: 45 ft/lbs - 70 ft/lbs, 9/16" bolts: 65 ft/lbs…

view full answer...

Answer 11

Yes, axle spread and wheel base by definition are the same measurements. You will measure from the center of one axle to the center of the 2nd axle to determine what you axle spread is. This may be difficult as some wheels and covers will make this…

view full answer...

Answer 12

Since Grand Design is kind enough to list certain parts for their trailers I can confirm you have a 33" wheelbase on your 2020 Grand Design Transcend 27BHS. This means the MORryde Rubber Equalizers #MR87ZR will fit your trailer. Although I'm…

view full answer...