Would Stallion Arched Ramps Loading Ramp Set Be Good For Loading Snowblower Into Truck Bed

Question

Question:

Are these ramps good for loading my two stage 28 inch John Deere snowblower into my Chevy Silverado 2500

asked by: Michael

1

Helpful Expert Reply:

The # 288-07432-2 loading ramp would be an excellent choice for loading a self-propelled snowblower into the bed of your Silverado. The rungs on the ramps will provide excellent traction for both the tires on the snowblower, and for the person loading it.

If you click the provided link, you can see a demonstration video featuring the ramps.

expert reply by: Mike L

1

Answer 1

The Aluminum Ramp Ends for 2 x 8 Boards #288-07400 doesn't have anything special that holds the ramps to a tailgate and instead relies on the length and width of the plate, as well as the downward pressure applied by the weight of what…

view full answer...

Answer 2

Yes, a single arched loading ramp is part #288-07432. Please keep in mind the weight rating of a single ramp is 1,500 lbs compared to 3,000 lbs for the set. The set is part #288-07432-2. I have attached a video for your reference.

view full answer...

Answer 3

The longest folding ramps we have for you is the Arched Loading Ramp Set part #288-07432 for 1 or part #288-07432-2 for 2 which are 90" long. The 90" length will ensure the angle that will be required to load the generator in your…

view full answer...

Answer 4

If the trailer brakes activated when the pin was pulled on your breakaway you would have noticed. You would have heard the trailer dragging, felt it while towing, or seen the smoke coming off of the tires as you dragged it along. More than likely…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Yes you can just swap out the bars on your Equal-i-zer Weight Distribution System w/ 4-Point Sway Control #EQ64FR with the Replacement Spring Bar for Equal-i-zer Weight Distribution Systems #EQ90-02-1499.

view full answer...

Answer 7

What will help prevent the bottoming out is a ramp set that is longer and has a bit of an upward bow like the #288-07489 has. Without knowing the length of your current ramps I can't say if these would be an improvement in that area. These…

view full answer...

Answer 8

For most golf carts you want to go with a 1,000 lb capacity loading ramp. I would however recommend the Erickson Arched Ramps part #EM07486 as they have a 3,000 lb capacity, an aluminum construction which will make them lightweight, and straps that…

view full answer...

Answer 9

The Stallion #288-07432-2 folding cargo ramps are manufactured in China. If you'd prefer a US made alternative, I'd recommend the Gen-Y #325-GH-R84 84 inch long aluminum loading ramps. If you click the provided link, you can see a…

view full answer...

Answer 10

The safest way to secure a 4-wheeled vehicle like a golf cart in a truck bed is to use wheel nets that secure to the truck bed in some manner. The Erickson E-Track Tie-Down Kit #EM09160 is one option that is similar to the Pack 'Em kit you…

view full answer...

Answer 11

We have ramps that will work perfectly for loading your 1690lb UTV into the bed of your truck. I recommend the Arched Loading Ramp Set #288-07432-2 which is 90" long x 18" wide and has a combined weight capacity of 3000lbs. The…

view full answer...

Would Stallion Arched Ramps Loading Ramp Set Be Good For Loading Snowblower Into Truck Bed

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching