7-Way Extension for Ford F-350 for In-Bed Camper

Question

Question:

Hi, I have a 2021 F350 long bed. It is already setup for 5th wheel with the 7 pin outlet in the driver side rear bed panel. Im in the market for a cabover camper for short trips. I need just a basic extension to plug in, run under the bed rail to the front of the bed by cab so I can plug into the cabover camper to operate the camper lights. Assume this 8 foot extension will work well, just checking before I purchase. Thanks.

asked by: Keith K

0

Expert Reply:

The Hopkins Endurance Universal 5th Wheel/Gooseneck 7-Way RV Extension Cord part # HM20049 will work great to extend the 7-way trailer connector from the bed/bumper to the in-bed camper on a Ford F-350.

expert reply by: Conner L

0

Answer 1

You'd have to install the #41157 on your tow vehicle which comes with a 10 foot long 7-way socket extension that plugs inline with the 7-way you have at the rear of your vehicle. This could then be routed on the side of your trailer or underneath…

view full answer...

Answer 2

We do have the parts needed to add a 7-Way trailer connector to the bed of your 1997 Ford F-350. To determine exactly what you will need we have to first look at what type of trailer connector, if any, is on your truck. If it came with a factory…

view full answer...

Answer 3

Thanks for the picture of the trailer wiring connector you have. Based on that you are in need of a 7-way blade extension like the part #C56080 for a 7 foot long extension or part #HM20049 for an 8 foot long extension. Or if you are looking for…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 10

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 11

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 12

The first thing you will need for your 1999 D250 is a 4-way. The Curt T-Connector Vehicle Wiring Harness #C55317 plugs into the connection points behind your rear bumper and will allow you to power your trailer's signal lights. Once the 4-way is…

view full answer...

7-Way Extension for Ford F-350 for In-Bed Camper

Product Page this Question was Asked From

Continue Researching