Review of Gen-Y Hitch Trailer Hitch Ball Mount - Adjustable 2 Ball Mount - 325-GH-1724 Video

The Gen-Y Torsion 2-Ball Mount #325-GH-1824 that you referenced does now come with set screws on the sides of the square openings to allow the movement of the ball and retainer to be reduced. I attached a picture of them for you to check out. The…

The only hitch we currently carry that has all 3 ball sizes along with a pintle lock is the Patriot Hitches 5-Way 3-Ball Mount and Adjustable Drop Hitch Adapter #PH94FR. As this is limited in weight capacity to 7,000lbs due to the drop receiver I…

I have a couple great solutions but placing a weight distribution system in a Replacement Shank for Gen-Y Adjustable Ball Mount part #325-GH-304 is not the way to go. Instead you can in most cases attach your current weight distribution system to…

To apply grease to the top of a hitch ball with the part #58117 all you would need to do is apply a small amount to the top of the ball. The coupler will then push the grease around and spread it evenly on the ball.

The overall length of the #325-GH-0352 is 7.563". The distance from the hitch pin hole to the adjustment holes is 4.5" and all the way to the end past the holes is 5.5". I have attached the dimensional drawing below for your…

The recommended pressure you'll need from the Firestone air bag kit part #F2071 will be the amount that allows the truck to sit level. The max pressure rating is 100 psi so you'll need to stay under that. When not towing you want to keep at…

Other than saying that the air bags need to be kept between 5 and 100 psi, Firestone does not offer much in the way of specifics. The instructions mention that as a general rule of thumb, 1 psi will support approximately 40 lbs of load. Your best bet…

Since the max trailer rating of your 2011 Ram 1500 is 7,600 lbs and the GVWR (gross vehicle weight rating) of your trailer is 7,000 lbs that means with your trailer loaded to max capacity you will still have 600 lbs of capacity on your pickup. This…