Can You Purchase a Pintle Hook Adapter for the B&W Tow & Stow Ball Mount

Question

Question:

I have a stow and go with the double ball. I need just the pintle hitch part now. Is that available?

asked by: Adam H

0

Expert Reply:

I do have an option for you but there isn't a pintle hook adapter for the B&W Tow & Stow Ball Mount. There is however a version of this ball mount which comes with a pintle hook but you can't add just that part to an existing ball mount. The B&W Tow & Stow Pintle Hook part # BWTS10056 is what you'll need to use.

expert reply by: Conner L

0

Answer 1

In order to pick out the correct rise/drop ball mount you need to take a couple measurements and do one simple calculation. It sounds like you may need a different drop ball mount, but to prevent you from ordering the wrong one check out the FAQ…

view full answer...

Answer 2

The shank portion of the B&W Tow & Stow Pintle Hook/Hitch Ball #BWTS10056 cannot be used as a component of a weight distribution system. B&W designed this adjustable pintle/ball combo hitch to offer the flexibility to tow as both a pintle…

view full answer...

Answer 3

Yes, you can use Clevis Adapter #BWTS35200B with your B&W Adjustable 2-1/2-Inch ball mount #BWTS20040B. The clevis has a 1-1/8-inch hole diameter. This adapter also work with the chrome-finish version of your ball mount, part #BWTS20040C.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 11

Normally trailer coupler height is around 17 inches, from the ground to the bottom of the coupler, and most hitch manufacturers design their hitches to work with a ball mount that will end up very close to this measurement. I am including a link to…

view full answer...

Answer 12

Hi Joe, Yep, you heard correct, you can go from a 2 inch shank to a 2-1/2 inch shank with your Reese weight distribution hitch without issue. One of the following 2-1/2 inch shanks should have the right rise/drop for your application. Here are the…

view full answer...

Can You Purchase a Pintle Hook Adapter for the B&W Tow & Stow Ball Mount

Product Page this Question was Asked From

Continue Researching