Replacement Hardware Kit For etrailer Trailer Hitch

Question

Question:

I lost the bag of parts to install this hitch. Is it possible to purchase just the kit?

asked by: Becca

0

Expert Reply:

Yes, it is. Simply go to part # RHK, type your hitch item number in and select the manufacturer. This will give you a complete hardware kit to replace what was lost.

expert reply by: Michael R

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 5

There is indeed a trailer hitch receiver that fits your 2024 Subaru Crosstrek Wilderness, from Curt, with the correct part number being the following: - Curt Trailer Hitch Receiver #C13382 I verified this fit with the manufacturer for you, and it…

view full answer...

Answer 6

Since your 2023 Subaru Crosstrek does not have raised rails you are going to need a whole new roof rack since the Thule Rapid 450R Feet #753-3399-02 are only going to fit vehicles with raised rails. I recommend sticking with the Thule roof rack…

view full answer...

Answer 7

In looking at the 2023 Subaru Crosstrek it is unchanged from the previous 2022 model year that the Curt Trailer Hitch Receiver #C13382 fits. I recommend installing the T-One Vehicle Wiring Harness #118467 so you will be able to add Auxiliary Lights…

view full answer...

Answer 8

The information I can find shows that there are no physical changes to the 2023 Subaru Crosstrek Sport from the 2022 model year which would allow the Curt Trailer Hitch Receiver #C13382 to fit. I have linked an installation video below that you can…

view full answer...

Answer 9

To get both of the 2021 Subaru Outbacks pulling the Safari Condo F1743, you would need to purchase two of the #ETBC7 kits. They would piggy back off of the existing 4 pin connections already on the vehicles, so you are already partially there. I did…

view full answer...

Answer 10

When using the 7-Way RV Upgrade Kit for Trailer Brake Controller Installation #ETBC7 to install the Curt Echo Mobile part #C51180 you can just tape up the blue wire of the adapter as it would not be used.

view full answer...

Answer 11

The Thule Hullavator #TH898 will require crossbars that overhang the towers by 4' - 8". There is not any kind of adapter that is made for this purpose. Your best bet will be to replace the factory crossbars with aftermarket crossbars that…

view full answer...

Answer 12

The shank on the Pro Series cargo carrier #63153 is meant to only install with a rise, but we have had a few customer install it upside down and in doing so create a drop shank for it. The drop ends up being 2 inches.

view full answer...

Replacement Hardware Kit For etrailer Trailer Hitch

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching