MORryde Tandem Axle Trailer Rubber Equalizers Installation - Travel Trailers Video

Yes, the MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps #MR76ZR will fit with the Equa-Flex system on your Grand Design.

Hi Alain, thanks for the question and yes, you made a very nice choice for your Grand Design Reflection 337RLS going with the MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps #MR76ZR. This is a very good kit…

Hey Mike, To determine if the MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR would be a compatible fit you'll first want to measure the bolt hole spacing on your current equalizers. The #MR87ZR has a 6-1/2" center to center…

Yes, equalizer kits like the MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR can work with 7K axles as long as the 33" wheelbase and basic dimensions of the equalizer are similar (see attached). Weight ratings are a bit of a factor…

I'd be happy to help, but you're going to need to measure the current equalizers on your 2021 Keystone Hideout 29DFSWE to confirm that the MORryde #MR87ZR are going to fit. The #MR87ZR measure 6-1/2" center to center of the horizontal…

The MORyde Rubber Equalizer #MR87ZR could absolutely be used on an enclosed trailer. The 8K rating would be per axle. It might be more accurate to say that these equalizers can be used on axles 8K and under. So if your trailer is 10K gross weight, a…

Yes, the MORryde Suspension Upgrade Kit #MR46ZR that you referenced is correct replacement wet bolt, bushing, and shackle kit for the CRE3000 kit that you have.

The MORryde Rubber Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K item #MR87ZR do come as a pair and you will be able to verify the cost on the product page.

Since your shackle straps are 2-1/4 inch for a wet bolt and heavy duty shackle kit you'd want the #MR46ZR which comes with bushings as well. You do not need new equalizers.

You will measure the MORryde Suspension Upgrade Kit for Tandem Axle Trailers #MR76ZR from the center of each hole on the shackle strap.

The MORryde #MR87ZR does fit just about anything as long as has the 33 inch wheel spacing. This should be measured from the center of the front spindle to the center of the rear spindle.

I spoke with Lippert about the mounting brackets for the Lippert On-The-Go Telescopic Ladder #LC64HD and found out that they are only sold as an OEM part. This means that only the motorhome/trailer manufacturer is able to order them so you…