Cushioned Equalizer Setup for Triple Axle Fifth Wheel Trailer

Question

Question:

What do you have for triple axle suspension equalizer 5th wheel

asked by: Frank E

0

Expert Reply:

For a cushioned equalizer set for a triple axle setup on a 5th wheel trailer we have the Equa-Flex kit part # LC279689 which has the same 5k to 8k capacity as the # LC696740 that you referenced.

expert reply by: Jameson C

0

Answer 1

The issue is that when you add an axle to a trailer you have to move all of the axles to allow the axles to sit in the correct spot. Otherwise you'll have ride issues. So your current center hanger location for your tandem setup would become the…

view full answer...

Answer 2

I checked with Lippert and the rubber cushioning cannot be replaced individually. If that is worn to the point of being ineffective, you will need to replace them with the Equa-Flex Cushioned Equalizers - Double Eye Springs - Triple Axle - 5K to 8K…

view full answer...

Answer 3

For your triple axle on your 4200 Cyclone toy hauler, I recommend the E-Z Flex Triple Axle Suspension Kit with 7-3/4" Equalizers #K71-657-00. This system includes the wet bolts, metal bushings, and shackle straps. This system is also available…

view full answer...

Answer 4

The widest upgraded equalizer we have for trailer suspension is the Equa-Flex part #LC314336 which is 14-5/8 inches from bolt center to bolt center. This is a cushioned kit that is designed for use with 5,200 lb trailer axles which most likely would…

view full answer...

Answer 5

There is an upgrade kit that will work for your Keystone Carbon's Equa-Flex Cushioned Equalizers - Triple Axle #LC279689. Even though Lippert does not have a kit for the triple-axle Equa-Flex for some reason, MORryde does have a heavy-duty kit…

view full answer...

Answer 6

There are trailers that leave the factory with different axle spacing, so I wouldn't worry too much about the difference. To determine the correct replacement equalizer I recommend measuring the distance between the horizontal mounting holes in…

view full answer...

Answer 7

From the information that you gave me the correct replacement suspension kit for your Heritage boat trailer is the Dexter Heavy-Duty #K71-359-00. The equalizer uses the same dimensions and it's meant for 33" axle spacing as well. The only…

view full answer...

Answer 8

As the Dexter #K71-657-00 is rated for 35 inches of axle spacing, I do not suggest using it. However, we do have a MORryde system that will work with your spacing. The MORryde Shock Absorbing Suspension Equalizers for Triple Axle Trailers w/ 33"…

view full answer...

Answer 9

Leaf spring length also plays a factor in axle spacing which may be why yours don't seem to match what you've found but since you have a triple axle trailer with 7k axles the correct kit you'd need is the part #LC279689.

view full answer...

Answer 10

Thanks for the pictures! For your 2021 Vortex 5th wheel with triple 7,000 lbs axles the best way to upgrade your equalizers will be to use the Lippert Center Point item #LC1565401. This system will absorb road shock and reduce chucking. The Center…

view full answer...

Answer 11

Great choice in selecting the Equa-Flex Cushioned Equalizers #LC279689. Yes this identifies the wet bolts and shackles as being sold separately, you will need to measure the current shackles so as to match as close as possible. A slight variation is…

view full answer...

Answer 12

Sorry to hear about your troubles. Yes, the Equa-Flex Cushioned Equalizers - Double Eye Springs - Triple Axle - 5K to 8K item #LC279689 referenced in your picture is the best option for your Keystone Raptor 3812TS. If you are getting a complete…

view full answer...

Cushioned Equalizer Setup for Triple Axle Fifth Wheel Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching