Replacement Shoe and Lining Kit for etrailer 12 Inch Electric Trailer Brake Assembly

Question

Question:

A number of years ago, I installed four of your 12x2 in Electric Trailer Brake Assemblies #AKEBRK-6R and 6L on my Keystone Cougar and have been very happy with them. Its now time to reline them. My question: Are your 12x2 in brake shoe kits: #AKBRKR-S-12 compatible with those brake assemblies? Thanks!

asked by: John D

1

Helpful Expert Reply:

I'm glad to hear they have done well for you over the last few years. You are correct, the Replacement Shoe and Lining Kit # AKBRKR-S-12 is the correct replacement part for your # AKEBRK-6R and # AKEBRK-6L brake assemblies. You will need to order two of these, one for each side. This part works for both the left and right side brake assemblies.

I have attached a review video for your reference.

expert reply by: Robin H

1

Answer 1

It sounds like you are needing to replace the hub and drum assemblies on your trailer. The B12E-22 number you mentioned in your question does indeed correspond to an electric brake assembly, specifically the etrailer.com #AKEBRK-6R for the Right Hand…

view full answer...

Answer 2

We have exactly what you are looking for. Based on the part number you found on the sticker of your braking assembly you will need the Electric Trailer Brake Assembly LH #AKEBRK-7L-SA and RH #AKEBRK-7R-SA. These will be an exact replacement for your…

view full answer...

Answer 3

We do carry the exact brakes that you need for your B12E-02 AxleTek 12-GG Axle. For the Left Assembly you will want part #AKEBRK-7L-SA and for the Right Hand assembly you will want part #AKEBRK-7R-SA. These brake assemblies are made by AxleTek and…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 6

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...

Answer 7

The UFP H-1377 correlates to a Dexter #84 spindle, which is for a 3,500 pound axle. This will utilize an inner bearing #L68149 and an outer bearing #L44649. As this is being used on a boat trailer, I highly suggest going with the etrailer.com…

view full answer...

Answer 8

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 9

The short answer is anywhere that you can! You may need to get some short cables to wrap around each frame rail then hold them together with quick links and attach the safety cables from the RV to the quick links. Set #BX88208 is a great option…

view full answer...