Trailer Hitch Receiver Fit For 2022 Chevy Equinox

Question

Question:

Will my hitch #13591 fit my 2022 Equinox?

asked by: Don S

0

Expert Reply:

While there is a hitch fit for your 2022 Chevy Equinox (so long as it is not a diesel), the 13591 will not fit; that is for the previous generation of Equinox with different styling. The correct trailer hitch receiver for your 2022 Chevy Equinox is from Curt:

- Curt Trailer Hitch Receiver # C77FR

I verified with Curt that the # C77FR hitch is a fit for all models of '22 Equinox except those with a diesel engine. This hitch is rated for up to 4,500 lbs of towing and 675 lbs of tongue weight, and has a concealed crosstube so only the 2 inch receiver is showing, which helps your Equinox maintain its factory appearance.

expert reply by: Kyle S

0

Answer 1

The Curt Trailer Hitch #C77FR will fit just fine on your 2020 GMC Terrain with dual exhaust! If you check out the attached photo and installation video you can see that we were able to install this on a 2018 GMC Terrain that has the dual exhaust just…

view full answer...

Answer 2

The easier install between the Curt and Draw-Tite trailer hitch receivers for your 2023 Chevy Equinox is the Draw-Tite hitch, which is the following part number: - Draw-Tite Max-Frame Trailer Hitch Receiver #76419 The reason why is when installing…

view full answer...

Answer 3

For a hitch to carry bikes on your 2022 Chevrolet Equinox I recommend the Curt Trailer Hitch Receiver #C77FR. This is a custom fit, Class III hitch with a 2" receiver. It has a maximum tongue weight of 675 lbs which will be more than enough to…

view full answer...

Answer 4

The exhaust does need to be temporarily lowered to install the Curt Class III hitch part #C77FR on the 2020 Chevy Equinox. The access holes in the frame may also need to be enlarged with a drilling or rotary tool to fit the hardware through the…

view full answer...

Answer 5

It depends; you didn't say what hitch you had for your 2021 Chevy Equinox, but if you have the Curt Trailer Hitch Receiver #C77FR it will fit a 2023 Equinox non-diesel. More specificity is required to confirm at this time.

view full answer...

Answer 6

Yes we do carry trailer hitches for your 2023 Chevy Equinox like with the Curt Class III hitch part #C77FR which is mostly hidden and has great towing capacities. If you are local to us we can also install it as well. We are near St. Louis MO.

view full answer...

Answer 7

Hitch rattle like you described is a somewhat common occurrence after an install. The problem is that the hitch is now too close to the exhaust which moves a bit when driving and it starts hitting the hitch. What you can do is bend the exhaust…

view full answer...

Answer 8

When installing the Curt Trailer Hitch Receiver #C77FR in your 2020 Chevy Equinox, you will not need to do any trimming of the fascia or cut any type of hole in your bumper for hitch. This hitch will simply bolt onto the underside of the frame on…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...