Rubber Bed Mat For 2022 Ford F-150 Long Bed

Question

Question:

Greetings is the black armor bed mat for a 8foot bed one piece? Black Armor Heavy-Duty Rubber Custom Truck Bed Mat, part # BA97AR.

asked by: Robert D

1

Helpful Expert Reply:

We sure do!

I'd recommend the Black Armor Heavy-Duty Rubber Custom Truck Bed Mat, part # BA97AR. The mat is constructed of 1/2 inch vulcanized rubber, and is extremely durable.

expert reply by: Mike L

1

Black Armor Bed Mat
(click to enlarge)

Robert D.

1/15/2022

Greetings is the black armor bed mat for a 8foot bed one piece? Black Armor Heavy-Duty Rubber Custom Truck Bed Mat, part # BA97AR.

Reply

Robert D.

1/15/2022

Greetings is the black armor bed mat for a 8foot bed one piece? Black Armor Heavy-Duty Rubber Custom Truck Bed Mat, part # BA97AR.

Reply

Mike L.

1/17/2022

The Black Armor # BA97AR is a two piece mat. It's constructed that way so that it's easier to ship. You can see this in the photo I've provided.

Reply

Answer 1

For your Lance 650 truck camper, I recommend taking a look at the Swagman Roamer LT Roof Rack #S80510. This particular roof rack is designed for truck caps and campers and features a weight capacity of 150 pounds. The included feet will bolt on…

view full answer...

Answer 2

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors…

view full answer...

Answer 3

For the Grand Design Momentum 25G the best Equal-i-zer weight distribution system is the Equal-i-zer Weight Distribution System - 14,000 lbs GTW, 1,400 lbs TW #EQ37140ET. The reason for that is you want to choose your system based on total tongue…

view full answer...

Answer 4

After you've packed the bearings and assembled everything, carefully slide the hub assembly onto the spindle and install the outer bearing. Install the spindle and tang washer and run the spindle nut down finger tight, then rotate the hub back…

view full answer...

Answer 5

Yes, you can use Curt weight distribution shank #C17122 with your Equal-I-zer system to get the additional length needed for you to be able to lower the tailgate on your 2017 GMC Sierra 1500. The Equal-I-zer head uses 3/4 inch diameter bolts to hold…

view full answer...

Answer 6

Since it sounds like you're needing more drop because your new truck is taller, I'd go with the Curt #C17122 which is 16 inches long and has a maximum rise of 10-1/2 inches or drop of 7 inches. The shank has 3/4 inch diameter holes that are…

view full answer...

Answer 7

As long as you do not exceed the 15,000 lb gross trailer weight (GTW) and 1,500 lb tongue weight (TW) rating of the Curt Weight Distribution Shank part #C17122 then you should have no problems switching from a 9" long shank to a 14" long…

view full answer...

Answer 8

That is correct, you can tap into the plug and it will provide a charge but keep in mind that this is not the most efficient way for charging a battery. This method does not provide any charge balancing or battery charge management and on newer…

view full answer...

Answer 9

The brake assemblies you have are 7k Dexter assemblies that are 12 inch by 2 inch in size. The part number #AKEBRK-7-SA will work as a great replacement set. This includes assemblies for both sides of your trailer that are self adjusting.

view full answer...

Answer 10

Your 2024 Chevrolet Silverado 3500 will come with a 2-1/2" trailer hitch receiver. If your truck did not come with a reducer for a 2" receiver we do have the B&W #BWRHXA2182 if you need to use your 2" ball mount or hitch mounted…

view full answer...

Answer 11

I'm assuming your 2024 F-250 has the 6-3/4' bed. If that is correct, the right tie-downs are in fact the #TLF3008 and #TL77CR. TorkLift has accounted for the bed access steps on the 2024 model and confirmed these will fit your truck.

view full answer...

Answer 12

There is not a plug and play adapter for your Lance connector that we are aware of. Typically this is installed by the Lance dealer. A junction box/7-way plug kit like #HS381-9000 is an option you have to convert the camper to match the 7-way RV…

view full answer...

Rubber Bed Mat For 2022 Ford F-150 Long Bed

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching