Replacement 12 inch Brake Assemblies for Dexter 36-89 on Trailer

Question

Question:

I have dexter brakes on my fifth wheel that I my need to replace. On the back of the brake it has the following PR-FF SEC-FF 6KPR-GG SEC-GG 12X2XO 36-89. What brakes would replace what I have?

asked by: Mark B

0

Expert Reply:

The brake assemblies you have are 7k Dexter assemblies that are 12 inch by 2 inch in size.

The part number # AKEBRK-7-SA will work as a great replacement set. This includes assemblies for both sides of your trailer that are self adjusting.

expert reply by: Jameson C

0

Answer 1

Based on the photo and information you provided, I can tell you have 12 x 2 inch Dexter brake assemblies for 5.2K axles, for which the Electric Trailer Brake Kit #AKEBRK-7-SA will be an excellent replacement. These are self-adjusting brakes so they…

view full answer...

Answer 2

For your Ram 2000 series jack like the part #TJB-2002-B the replacement handle part #TJPB-HD is the correct fit. As long as you see the red handle on your jack this is the correct fit. You would not need to compare dimensions of it.

view full answer...

Answer 3

The overall length of the Replacement Topwind Handle w/ Claw Knob for etrailer and Ram Square, Direct Weld Jacks #TJD-7000-HD is 10-1/2 inches. The center to center length is 9 inches. I've attached a photo to assist.

view full answer...

Answer 4

Thank you for the photos, that really helps! It looks like you're needing the 1-diode 2-1/2" round lights from Optronics; Red #MCL0040RBB and Amber #MCL0040ABB. The lens looks to be the same design and the bases have the same mounting design…

view full answer...

Answer 5

The Dexter Nev-R-Adjust Trailer Brakes #23-464-465 for 7,000 lb axles are very high quality and other brake shoes wouldn't be an upgrade. What will affect the life of the pad is how often the brakes are used, if they are frequently halting heavy…

view full answer...

Answer 6

If you measured the width of your trailer's electric drum brake shoes as 2-inches this should be fine as long as the brakes' diameter is 12-inches. Such 12 x 2-inch electric drum brakes are quite popular on RVs like your 2005 Keystone Cougar.…

view full answer...

Answer 7

I reached out to my contact at Lippert and he said that the rubber inside part of the Road Armor Shock Absorbing Equalizer Kit #LC696740 is not replaceable so if it were to become damaged you would need to replace the unit.

view full answer...

Answer 8

I currently have three diffrent self-adjusting assemblies for your boat trailer with 10" x 2-1/4" electric drum brakes which are attached for you below. eTrailer Electric Trailer Brake Kit part #AKEBRK-35-SA (3,500 Axles) Dexter…

view full answer...

Answer 9

Our range of trailer hub/drum assemblies for 7K axles is shown on the linked page. These all have the 8-on-6-1/2 bolt pattern. You can select a spare hub for your new 2018 Grand Design Momentum 349M 5th wheel toy hauler by confirming which set of…

view full answer...

Answer 10

Tonneau covers and ladder racks can be compatible with each other when they do not use the same mounting points on the truck bed rails. Both tonneau covers and ladder racks can mount either inside the bed rails or on top of them. As an example, the…

view full answer...

Answer 11

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 12

In order to remove the hub/drum on your trailer you will want to first remove the spindle nut. Once the spindle nut is removed you are going to want to take a hammer and tap the outer portion of the drum as well as the hub face a few times to break…

view full answer...