What 4-1/2 Thread Per Inch Coarse Thread Hitch Balls Are Available?

Question

Question:

Do you sell a riser ball with coarse threads 4-1/2

asked by: Ryan

0

Expert Reply:

The 2-5/16" Hitch Ball # C40088 and # BWHB94009 are the only hitch balls we carry with the 4-1/2" thread per inch coarse thread. These will not have the riser ball like you are looking for. These balls have a 2" diameter shank.

For a riser ball you would have to look at the 2-5/16" Hitch Ball w/ 1" Rise # BWHB94005 or 2-5/16" Hitch Ball w/ 2" Rise # BWHB94006. These have fine threads 12 per inch and only a 1-1/2" diameter shank.

expert reply by: Bud M

0

Answer 1

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

I spoke with my contact at Curt and they informed me that the case dimensions of the Curt Curt Ball and Safety Chain Loop Kit #C60692 are 16.5"x10.5"x5".

view full answer...

Answer 6

The Galeo Pro GPS Tracking Device #GA94FR will update the location when you press the "Locate" button in the app. Otherwise you will get push notifications when it detects movement so you know when your trailer is being moved around - which…

view full answer...

Answer 7

The OEM location for the gooseneck ball hole in the bed of your 2020 Ford F-350 will be 45-1/2 inches forward from the rear edge of the truck bed. There would be a flat spot in the bed where the ball will install as well. I attached a picture that…

view full answer...

Answer 8

The issue you are having with the gooseneck hitch ball getting stuck in the trailer hitch after sitting is pretty common, especially with the factory pop-in hitch balls that have the latch in the top like the Curt Ball and Safety Chain Loop Kit part…

view full answer...

Answer 9

No worries, we are happy to help! Yes, the Curt Ball and Safety Chain Loop Kit #C60692 listed as a fit for your 2019 Ford F-250 replaced the C60609 so they are essentially the same and they both fit your F-250. Sometimes the changes made to kits that…

view full answer...

Answer 10

In regards to the Linxup GPS Tracking Device part #300-AT3, once you install the GPS device, you'll be ready to choose and set up the Linxup service plan that works for you. When you purchase a service plan, you can download the Linxup mobile app…

view full answer...