Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Round trailer axle beam measures 95" from hub face to hub face (when hubs - sold separately - are mounted) and 79-1/4" from spring center to spring center. E-Z Lube spindles make it easy to lubricate bearings (sold separately).
Features:
Specs:
There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate. Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam).
The spring center (B) is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other. This axle beam comes with the spring seats welded on.
If you are replacing your trailer's axle, you should be able to figure out which type you need by determining your trailer's capacity, the bolt pattern of your wheels, the brake type and the aforementioned lengths.
The E-Z Lube spindles on this axle are meant to work with E-Z Lube-compatible hubs to make lubricating your bearings quick and easy. Each E-Z Lube spindle has a zerk fitting on the end. And every E-Z Lube hub comes with a grease cap that has an easy-to-remove rubber plug. Just pop out the plug on the cap to access the zerk on the spindle. When you inject grease into the zerk with a grease gun, the grease will flow to both the inner and outer bearings of the hub, lubricating the bearings and forcing out old, ineffective grease. Once you see new grease beginning to be pushed out, you know that your bearings are fully lubricated. This means that you can lubricate the bearings without the mess of taking apart the entire assembly.
Dexters are made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the leaf springs (sold separately) can mount beneath the axle. This axle is also built with drop spindles, which will lower the ride height of your trailer to allow for easier loading and unloading.
Each axle is manufactured to create a certain camber angle. This ensures that the angle of the wheels is correct for your towing needs. Because the primary concern when towing is maintaining controlled, in-line movement, each axle is made so that your trailer's tires will run along the pavement evenly, with contact across the width of the tread. The result is excellent straight-line acceleration for steady, in-line tracking. You might notice the bend near the center of the axle; this is what ensures the proper camber angle. Having the center ride a bit higher and the sides of the axle bent lower allows the axle to give just enough to compensate for the load.
Average Customer Rating: 4.8 out of 5 stars (664 Customer Reviews)
Round trailer axle beam measures 95" from hub face to hub face (when hubs - sold separately - are mounted) and 79-1/4" from spring center to spring center. E-Z Lube spindles make it easy to lubricate bearings (sold separately).Little damage from handling put still g ood
etrailer decided to ship this 140lbs axle via US Mail. Scheduled delivery was in 5 days from date of order. Immediately after getting the USPS tracking I called and was on hold forever. I was told it was new people in shipping and my axle would arrive on time. A month later and numerous calls later, still no axle, my mail man said " no way would he would be delivering anything that size". I was then told I would get it refunded since it was lost in the mail. A month later, and several calls saying the refund was "processes" still no refund. Then I was told I'd have to ship it back before getting a refund. But I still never received it. 2 months later an un marked car delivered it and finally etrailer sent a UPS pickup and got refunded. 3 months of different stories everytime I called. Be aware, they must have a lot of newbies at etrailer.
It is what was listed. Fits perfectly. Best place to get trailer parts quick and easy.
Axles where great customer service was also great helping make sure I got the correct axle for my hubs and bearings. Only thing that would be nice is if they had an option to ship the spring pad mounts loose because I had to cut them off and re-weld them in the correct location for my trailer.
They made it happen! They knew exactly which axle I needed and had it shipped right away. Thanks for making this easy!
axle beam arrived in specified time. item arrived with no damage (thanks for the extra shipping packing). the free shipping was a definite bonus. over all a good experience.
Excellent product
Great communication and turn around from order submission to receiving the product was fast!
Said that axle was in stock and would be delivered on may 27th well got a notice that they were shipping it out on the 28th. Kinda of hard to to get it before it shipped right Well now I was told it was shipped on May 30th which was Memorial Day hard to believe but it was delivered on jun 1rst and was what I ordered and I'm happy with it.Just wish they were more up front with there shipping.
Dave B
Service was beyond exceptional!!!!
The axle came in 2 days. The axle was exactly the same as my old one. I put it in this afternoon and it’s ready to use for tomorrow. No complaints whatsoever! Actually I never usually review anything but this experience was exceptional.
The product looks awsome!!
Great price and fast shipping
Great service, super fast delivery!!
I called to confirm fitment and availability. I then place the order on line on Wednesday and the axle showed up Friday evening. You can not beet that! Local suppliers where about $75.00 more and I had to go pick it up an hour each way!
THANKS ETRILER FOR TAKING CARE MY ONLINE ORDER THE DEXTER TRAILER AXLE WAS PERFECT FOR MY NEW INSTALLATION I DONT NEED TO WORRY ABOUT THE EXTRA LOAD ON MY BOAT TRAILER
I replaced the noodley Lippert axles that bent on my utility trailer. Much better. They also have the proper bend in them for the load compensation. I took the part number off the Lippert axle, and etrailer was able to cross reference the part numbers for perfect fit.
You were great to the way you help me resolve my problems. The axle is the correct one I needed. Just one small thing I found that it was missing two mounting studs.
Check your order! I specifically ordered Dexter axles and they sent me generic ones.
I inherited an aluminum trailer that ended up needing a complete overhaul and etrailer was the best resource I could have found. After researching extensively to find out what I needed and watching their videos on how to do it I ended up ordering an EZ-lube axle, galvanized hubs, springs and a hanger kit (in other words everything from the frame down).
Everything shipped quickly and arrived in great shape. All the parts worked perfectly and I couldn't be happier!
Do you have a question about this Trailer Axle?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Tony
10/25/2023
good