Which RoadActive Suspension System Fits 2022 Ford F-150 4WD

Question

Question:

I would like to add the roadmaster suspension enhancement to my 2022 F-150. I have 4 wheel drive, it is a 2022. Which one fits my truck please.

asked by: Chris B

0

Expert Reply:

For a RAS kit that fits your 2022 Ford F-150 4WD you need the RoadActive Suspension Custom Leaf Spring Enhancement Kit # RAS3611-Y. This kit will be a great addition for your vehicle and keep you level when towing or hauling heavy loads. It will also help to prolong the life of your springs and shocks. This kit has a weight capacity of 2,000 lbs and is made in the USA.

Depending on what you are doing, there is also the heavy duty kit which is the # RAS3611-YHD. This kit is the same as the other but has a higher weight capacity of 3,000 lbs.

I have attached an installation video for your reference.

expert reply by: Robin H

0

Answer 1

For your 2022 Ford F-150 4x4 towing a trailer I recommend the RoadActive Suspension #RAS3611-Y which is the 2,000 lbs. standard duty kit unless your trailer weights over 20,000 lbs., then you would want the RoadActive Suspension #RAS3611-YHD which is…

view full answer...

Answer 2

The absolute best way to help prolong your leaf springs on your 2022 Ford F-150 is with the RoadActive Suspension Custom Leaf Spring Enhancement Kit #RAS3611-Y (2k load leveling capacity) or the heavy duty #RAS3611-YHD (3k load-leveling capacity).…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Yes, you are going to also need the Demco Autoslide Capture Plates for Trailair Rota-Flex Pin Boxes #DM6171 when using the Demco Autoslide 5th Wheel Trailer Hitch w/ Slider #DM8550040 with your Road Armor pin box. For a suspension enhancement I…

view full answer...

Answer 10

Hello Tim. We can definitely set you up with a complete AC system with an Advent low profile unit. We currently do not offer these parts as a package, but you can purchase all of the exact same components separately. To answer your question, yes, the…

view full answer...

Answer 11

The correct Roadactive kit that fits your 2023 Ford F-150 is the part #RAS3611-YHD. I really like the RAS kits as they basically don't have any downsides. You get the adjustable support, an easy install, no maintenance, and actually improves…

view full answer...

Answer 12

If your Ford F-450 has an actual bed and is not a cab and chassis model (with a service bed or flatbed) then you can use the Curt universal folding gooseneck ball rail kit #C61502. You could then use Curt hitch #C-52 or #C65500. A custom hitch for a…

view full answer...