Provide your trailer wheel bearings with premium protection - replace your existing grease caps with Bearing Buddies. They provide an easy way to control the grease volume in your axle hub and have blue indicator rings to visually monitor levels.
Features:
Specs:
Replace your existing grease cap with a Bearing Buddy to ensure a safe, easy way to monitor and control the level of grease in your axle hub. To adjust the amount of grease in the hub, use a grease gun to add more through the appropriate fitting. Adding grease moves the Bearing Buddy spring-loaded piston outward 1/8".
The O-ring inside the barrel of the Bearing Buddy maintains a seal from the outside. The interior of the Bearing Buddy is pressurized, preventing water from entering the barrel and diluting the grease.
An automatic pressure-relief feature is built into the Bearing Buddy. When the device is full, grease will seep around the edges of the piston and into the barrel. This prevents overfilling that can damage the inner seal.
The blue indicator ring allows you to visually monitor the amount of grease in your hub. The ring should sit flush with the top of the cylinder. If the ring is below the top of the cylinder, add grease until the piston moves 1/8" outward.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there, I'm Michael with etrailer.com. Today we're gonna take a quick look at this Bearing Buddy set of chrome plated bearing protectors and these two Bearing Buddies are gonna replace the grease caps in the hubs on one of your trailer's axles. And this is gonna be especially useful on boat trailers. This will fit a 2.047 inch hub bore. This will work with the outer bearing cup or race model that you see on the screen there, as well as various outer bearing models will install very easily just like your grease caps be put in place there. And then this is going to serve a very important purpose of helping to protect your bearings.
So this will allow your boat trailers wheels to be completely submerged and it will maintain a slight controlled pressure of about three psi. It's got a spring loaded piston inside there that's going to have that pressure so that when your warm bearings and hubs enter the cold water and that vacuum forms that will oftentimes pull water and dirt into your hubs, that spring is going to keep pressure there so that water is prevented from entering the hubs and bearings which will help to prevent corrosion and pitting of your bearings which can cause to bearing failure. So this is gonna be a very important component if you are gonna be backing your boat trailer into water. This will help to prevent those bearings from failing for you. This is also going to allow you to visually monitor the level of grease with the blue indicator ring there.
So the ring will sit flush with the top of the cylinder when you've got enough grease in there when it's full. If the ring is below the top, you just need to add some grease and to move that piston outward about an eighth of an inch. So this will provide easy accessible grease fittings here. You can see on both these. So very simple to add your grease, very quick and simple for you.
And it's also gonna prevent overfilling because the automatic pressure relief feature here is going to allow grease to seep around the piston edges and into the barrel when it's full. So that's gonna help prevent any rear seal damage as well. Both of these are made here in the USA. They're constructed of stainless steel internal parts and a triple chrome plated steel barrel that ensures nice, long lasting fit, especially compared to like plastic or aluminum products is going to hold up well for you for a long time to come. You can see they do include these rubber covers you can put in place for extra protection, especially with your grease fittings.
You don't have to worry about any dirt, corrosion getting on those with those covers in place. And these do come with a lifetime warranty so if you we're to have any issues with them, you're more than welcome to reach out to us here at etrailer.com. We always enjoy working with our customers, make sure you're getting good quality products and help 'em solve any issues that may come up. But I do think these are gonna be a really great way to go especially for those of you who are frequently using your boat trailer. Think they'll pay for themselves within a season or two not having to worry about replacing your bearings and having that visual indicator for making sure you've got enough grease in there. That completes our look for today. Again, I'm Michael with etrailer.com. Thanks for watching.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.