Mounting Bracket For Curt 7-Way RV-Style Trailer Connector # C55416

Question

Question:

I purchased a Curt C55416 trailer electrical connector. Will it fit into the 319-S7-61 aluminum bracket? I know that the bracket needs to be drilled to mount the bracket to the vehicle. Does this bracket need to be drilled to install the connector into it? Thanks

asked by: JAMES H

0

Expert Reply:

The Curt Mounting Bracket # C67UR is the bracket that I recommend using with the Curt 7-Way RV-Style Trailer Connector # C55416 that you already have. This connector uses a mounting bolt pattern of 2-1/4" X 1-1/2".

The EZ Connector Mounting Bracket # 319-S7-61 has a different bolt hole pattern as it is designed to be used with the EZ Connector Magnetic 7-Way Trailer Connector # 319-S7-05. It has the larger 2-1/2" X 1-3/4" bolt pattern.

expert reply by: Bud M

0

Answer 1

The mounting brackets that normally hold 7-ways like the #C55416 that you referenced typically have a 2 inch center diameter like the part #PK12711U. If you were wanting to drill a hole in a surface to mount this into I'd go with a 2 inch hole…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 11

Hey Richard, thanks for reaching out! The Dexter DX7.5 Drop-N-Go Brake Actuator #099-175-00 is a great option for a replacement actuator because it's a direct replacement for the common Model 60 actuators that were popular in the '90s.…

view full answer...

Answer 12

The first thing you will need for your 1999 D250 is a 4-way. The Curt T-Connector Vehicle Wiring Harness #C55317 plugs into the connection points behind your rear bumper and will allow you to power your trailer's signal lights. Once the 4-way is…

view full answer...

Mounting Bracket For Curt 7-Way RV-Style Trailer Connector # C55416

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching