SumoSpring Fit for Front Suspension of 2008 Fleetwood Bounder 35H Motorhome

Question

Question:

What size sumo springs do I need in the front of my 2008 Fleetwood Bounder 35H?

asked by: Chris C

0

Expert Reply:

The Sumo Springs front helper springs you need for your 2008 35H Fleetwood Bounder Motorhome will depend on which chassis it's built on.

If it's on the Ford chassis, you'd use # SSF-171-40-2. If it's on the Workhorse chassis, use # SSF-280-47.

I've linked to some product videos that you might find helpful.

expert reply by: Mike L

0

Answer 1

Yes, the SumoSprings Custom Helper Springs Kit #SSF-280-47 that you referenced has been confirmed to work with the leaf spring suspension you have on your 2004 W22 Workhorse Holiday Rambler. I attached a picture that I took from the installation…

view full answer...

Answer 2

Yes, the SumoSprings Maxim kit part #SSR-280-54-1 would work great to improve the ride quality and handling of your 2005 Workhorse W22 that already has a rear sway bar installed on it. This will further create more stability and get rid of any…

view full answer...

Answer 3

For the biggest immediate improvement in ride quality I definitely recommend starting off with a rear sway bar. For your Tiffin RV built on the Workhorse W20 chassis the Roadmaster Anti-Sway Bar #RM-1259-108 will work perfectly. Most of the weight of…

view full answer...

Answer 4

I attached a picture that shows where the heat strip #ACMHD attaches on an Advent AC unit like the #ACCOL135 as well as a review video that shows the install process.

view full answer...

Answer 5

A steering stabilizer like the Roadmaster TruTrac Front-Axle Trac Rod #RM-TRACF53 would be a great addition to your motorhome. This product braces the axle of the vehicle to prevent jarring and keep it inline which will reduce driver fatigue by…

view full answer...

Answer 6

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 7

Roadmasters priority when it comes to their sway bars is top notch quality and the easiest install for the customer. This typically cuts the install time down enough that you end up saving money if you pay to have the bars installed or decide to do…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

Hey David, actually what is going to make the biggest improvement in handling and stability for your 2011 Itasca is an upgraded rear sway bar with the part #RM-1139-175. I know that's not what you asked about but for motorhomes where most of the…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

I see what you mean about the cover being "recessed" into the front of the trailer. After looking thru a few pictures of these 2005 Trail Lite Hybrid trailers, it appears to be a fairly unique tank cover. I am sorry to say that we do not…

view full answer...

Answer 12

We have the SumoSprings #SSF-280-47 that will fit the front of your 2005 Coachmen Aurora if you have the Workhorse chassis. We also have the Rear #SSR-280-54-1 for the same chassis if you need them as well. If your Aurora was built on a different…

view full answer...