Replacement Hub For A 1949 Or 1950 TeeNee Boat Trailer With Short Spindles
Question:
I have an old 1949 or 1950 TeeNee boat trailer that needs a 3 1/2” short hub with 4 bolt pattern. Will this one work ?
asked by: Rick
Expert Reply:
I have a solution for you, but as the short spindles have not been produced for some time now, there will not be a hub that will fit them properly, unfortunately.
You will need to replace the spindles with the BT8 Spindle for 2,000-lb Trailer Axles # TRU59FR. If you are or know a good welder, this can be done pretty easily, but you need to make sure the cross tube connecting the two spindles has an inner diameter of 1-3/8" (typically a 1-3/4" outer diameter). Once these are on, the CE Smith Trailer Hub Assembly item # CE13110 can be installed quickly and easily.
Products Referenced in This Question
BT8 Spindle for 2,000-lb Trailer Axles - 1-3/8" Diameter
- Trailer Spindles
- Standard Spindle
- 8-1/4 Inch Long
- 1-3/8 Inch Diameter
- Round
- For 2000 lb Axle
- TruRyde
more information >
Product Page this Question was Asked From
CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 4 on 4 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643
- L44643
- For 2500 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- CE Smith
more information >
Continue Researching
- Search Results: tires 480 12
- Shop: Kenda 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 4 on 4 - Load Range B
- Shop: BT8 Spindle for 2,000-lb Trailer Axles - 1-3/8" Diameter
- Q&A: Can I Convert Regular Bunks To Roller Bunks
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Shop: Trailer Axle with Idler Hubs - 4 on 4 Bolt Pattern - 60" Long - 2,000 lbs
- Shop: BTR E-Z Lube Spindle w/ Brake Flange for 2,500-lb Trailer Axles - 1-3/4" Diameter
- Shop: 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-5/8" Long
- Shop: Kenda K353 Bias Trailer Tire - 4.80-12 - Load Range C
- Video: Yates Rubber Boat Trailer Parts - Roller and Bunk Parts - YR134-4 Review
- Q&A: Replacement Keel Roller Brackets for a Tee Nee Boat Trailer with 3 Inch Rollers
- Q&A: Replacement Hub and Drum Assembly for 1974 Tee Nee Boat Trailer with 7 inch Electric Brake Drum
- Search Results: winch stand
- Search Results: keel roller
- Search Results: cap nut
- Search Results: pal nut
- Search Results: hub cap
- Search Results: pin
- Shop: Trailer Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Q&A: What is the Difference Between Load Range C and D ST175/80D13 Trailer Tires
- Shop: Brake Controller
- Q&A: What is the Difference Between Load Range B and C Trailer Tires
- Article: Most Popular Wheel Bearings
- Shop: Suspension Enhancement
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Article: How to Choose the Right Trailer Hitch Class