Which B and W Trailer Hitch Fits 2012 Ram 2500

Question

Question:

I have a base plate B/W do you have side pieces and a hardware kit for same For 2012 ram 2500

asked by: Jeremy

0

Expert Reply:

The center section of the 3-piece B and W hitches like the # BWHDRH25211 that fits your 2012 Ram 2500 is not a universal component that fits various trucks with different side brackets. Instead all three pieces are made to fit the trucks so an entirely new hitch would be what you'd need.

expert reply by: Jameson C

0

Answer 1

The best image I could find of B&W hitch #BWHDRH25211 was in the instructions and it is a line diagram and not an actual picture. But it shows how the new hitch receiver will be directly beneath the factory receiver on your 2012 Ram…

view full answer...

Answer 2

The trailer hitch options we offer for a 2004 Dodge Ram 2500 are designed for models with the factory bumper. That said, the B&W Heavy-Duty Trailer Hitch Receiver part #BWHDRH25211 would be our best option as it does not actually tie into…

view full answer...

Answer 3

The factory trailer hitch on a 2004 Dodge Ram 2500 is not welded to the bumper but it is welded to a support beam that attaches the 2 frame rails so you would not be able to remove it. That is why I recommend a hitch designed to fit models that…

view full answer...

Answer 4

You are going to need to replace your 2 inch trailer hitch on your 2008 Dodge Ram 3500 with one with a 2-1/2 inch opening so that you can use your 40 inch hitch extender. For that you would want the Curt hitch part #C15809 which is a confirmed fit…

view full answer...

Answer 5

Both the Reese Titan Trailer Hitch Receiver #45288 and the B&W Heavy-Duty Trailer Hitch #BWHDRH25211 are Class V hitches. The B&W does have the tongue weight you're looking for at 1600 pounds, while the Reese is only 1200 pounds. However,…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

The main difference between a Class III hitch and a Class IV hitch is the capacities they set for the hitches. Class III hitches are rated for up to 6,000 lbs GTW with 600 lbs TW whereas a Class IV is rated for up to 12,000 lbs GTW and 1,000 TW. For…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Which B and W Trailer Hitch Fits 2012 Ram 2500

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching