Does E-Track Backing Plate part # e66RR Work with US Cargo E-Track

Question

Question:

Hello, Does your adaptor plate for Etrack work with other companies that sell Etrack such as I have some US Cargo Etrack already I want to use. Thanks!

asked by: Mark R

1

Helpful Expert Reply:

Yes the etrailer E-track backing plate part # e66RR does work with other brand e-track like the US Cargo E-track you mentioned.

expert reply by: Jameson C

1

Answer 1

We do recommend backing plates for all e-track installations. They will provide additional support. You will need a set of four backing plates, part #e66RR, for an 8' section of E-Track. I have included a product description link, a weblink on…

view full answer...

Answer 2

You can absolutely install E-Tracks like the etrailer Horizontal E-Track - Black Powder Coated Steel - 2,000 lbs - 94" Long - Qty 4 #e42VR you were looking at in your Forest River Enclosed Cargo Trailer yourself. Now there are a few things to…

view full answer...

Answer 3

E-track like the etrailer part #e92VR is made from 12 gauge steel which is 2.5 mm thick.

view full answer...

Answer 4

Yes, the Erickson ATV E-Track Tie-Downs #EM98CV includes wheels chocks and straps for four wheels and will accommodate vehicles weighing in at 3000lb maximum with tires between 10" and 30" in diameter. Since your 2006 Kawasaki Mule 3010…

view full answer...

Answer 5

For your application you would want to use the E-track backing plate part # e96RR so that you can secure the track to the floor adequately. This would work well with the #EM59150 and would allow it to have enough capacity. It installs on the opposite…

view full answer...

Answer 6

Rhino-Rack roof racks #RR86SR and #RR66SR fit different vehicles so the parts that make contact with the roofs are different between these 2 roof racks. Rack #RR86SR fits 2007 New Body to 2013 Chevy/GMC Silverado/Sierra Extended Cab models. Rack…

view full answer...

Answer 7

What you would want is the Yakima OnRamp part #Y36FR with the Yakima fat tire adapters part #Y23FR and you'd have a great way to carry your fat e-bikes at the back of your motorhome! While this really is your only option it is also a great option…

view full answer...

Answer 8

I typically recommend using the etrailer E-Track Backing Plate w/ Hardware - Galvanized Steel - 6" Long x 6" Wide - Qty 1 #e89RR on each end of your E-Track sections #E19148 and one in the middle for added support. With one backing plate on…

view full answer...

Answer 9

Yes we do have backing plates for the e-tracks. I recommend going with etrailer E-Track Backing Plates w/ Hardware - Galvanized Steel - 6" Long x 6" Wide - Qty 4 #e66RR which is a nice kit that includes 4 plates and all the necessary…

view full answer...

Answer 10

The E-Track Backing Plates, part #e96RR are available as a separate item and are not included with the Horizontal E-Track, part #E19148. The #e96RR mounting plate measures 6 inches long, 6-inches wide, and 1/8 inch thick. I have attached a photo of…

view full answer...

Answer 11

No, we do not have any rubber backing/spacers to use with the etrailer E-Track Backing Plates #e66RR to help reduce galvanic corrosion. I would just source some sort of rubber material from your local home improvement store and cut it to the size you…

view full answer...

Answer 12

If it were my trailer I would fasten the E-Track to the support beams under the trailer, either the side to side one or front to back ones, by going all the way through those support beams. E-Track like #E19148 is zinc-coated steel and since the…

view full answer...