Hitch Receiver for a 2022 Ford Escape Hybrid

Question

Question:

I have a 2022 Ford Escape Hybrid and I am looking for a hitch to use my Kuat bike rack.

asked by: Bernie

0

Expert Reply:

Yes, we do have a have two hitches that are compatible with your 2022 Ford Escape Hybrid. It is the etrailer Class 3 # e89YR and the Curt Class 3 Trailer Hitch Receiver item # C23FR. These custom fit hitches are very similar except for their finishes. The etrailer hitch has the matte black finish and the Curt hitch has the glossy black finish. They both have the 2" receiver opening. You will want to verify your Kuat Bike Rack is compatible with the 2" openings, which it should. I have linked an installation video for each of these for you to check out.

expert reply by: Jerred H

0

Draw-Tite Trailer Hitch Receiver # DT56MR Install On Ford Escape
(click to enlarge)

Answer 1

We have a fit for your vehicle. I will list the main items you will need to complete your set up. Roadmaster has confirmed that these will fit on you 2022 Ford Escape Hybrid Plug in. **Roadmaster Direct-Connect Base Plate Kit - Removable Arms…

view full answer...

Answer 2

The main difference between the Curt #C23FR and etrailer #e89YR for your 2022 Ford Escape is the finishes. The Curt #C23FR has a glossy black finish and the etrailer #e89YR has a matte black finish. Their capacities and installations are the same. It…

view full answer...

Answer 3

I suggest the Curt Trailer Hitch Receiver, #C23FR. This is a Class III - 2", custom fit hitch designed specifically for the Ford Escape. This bolt-on installation comes complete with needed hardware kit and installation instructions included.…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 6

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 7

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 8

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 9

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 11

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 12

While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This particular grease…

view full answer...

Hitch Receiver for a 2022 Ford Escape Hybrid

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching