Recommended Trailer Harness Wiring For A 2022 Ford Ranger

Question

Question:

What trailer wiring harness fits my truck?

asked by: Davis

0

Expert Reply:

If your 2022 Ford Ranger has the factory tow package then you'll just need the T-One Vehicle Wiring Harness with 7-Way Trailer Connector # 22124. This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located beneath the vehicle, on the driver's side.

Once installation is complete, the 7-way connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket like # 18138 is recommended to keep the connector secure.

If you do not have a factory tow package then I recommend the Curt T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector # C56431. This custom-fit T-connector plugs into your vehicle's wiring harness, which is located behind the driver side rear bumper. After plugging in the connector, route the 7-way end of the harness along the inside of your bumper toward the center of your vehicle.

Once installation is complete, the 7-way connector will be stowed beneath your vehicle, near the trailer hitch. If necessary, secure the harness with the provided cable ties or with the # 18138.

For a great starter ball mount kit I recommend the etrailer Ball Mount Kit for 2" Hitches - 7,500lbs # 989900. It has a 1-7/8" hitch and 2" hitch ball to allow you to tow multiple trailers. It has a 1" or 3" rise and a 2" or 4" drop to keep your trailer level while towing.

expert reply by: Kevin C

0

Answer 1

Yes, it will. The Curt T-Connector Vehicle Wiring Harness item #C56431 is confirmed to fit all models of the 2023 Ford Ranger with or without the factory tow package. This custom-fit T-connector plugs into your Ranger's wiring harness, which is…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

The Redarc Tow-Pro Liberty #RED24FR is the way to go over the Elite #RED44FR as you get the nicer functions of the Elite at a lower price. The Elite has the ability to be the more preferred proportional style of controller as well as a time-delayed…

view full answer...

Answer 7

Hey Antoine, so the two kits you mentioned are actually really similar and honestly I would go with the part #ETBC7 if I were you. The #ETBC7L is basically the same thing minus a couple wires and breakers so you may as well get the kit that has…

view full answer...

Answer 8

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...

Answer 9

The first thing you will need for your 1999 D250 is a 4-way. The Curt T-Connector Vehicle Wiring Harness #C55317 plugs into the connection points behind your rear bumper and will allow you to power your trailer's signal lights. Once the 4-way is…

view full answer...

Answer 10

There is a trailer hitch receiver as well as a 4-way wiring harness that fit your 2022 Jeep Grand Cherokee WL; that said, we don't have any way to reference a VIN so you'll need to confirm if you do have the WL, which is the new model of…

view full answer...

Answer 11

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 12

For your 2024 Hyunda Santa Cruz we have the Curt 7-way kit part #C68JR that is a confirmed fit. This installs by plugging into a factory wiring connector on your vehicle which means a really easy install that doesn't require any splicing.

view full answer...