Correct Sumo Spring Fit for 2021 Toyota Tundra

Question

Question:

2021 Toyota Tundra, 24foot TT 505# tongue 6000# GVW. Which Sumo spring SSR 610-47 or 54?

asked by: Ron P

1

Helpful Expert Reply:

For the best ride quality, you'll want to try to match the weight capacity of the SumoSprings application you use to the amount of weight what you'll be towing/hauling will apply to the rear suspension.

The tongue weight of your travel trailer will typically apply about 600-800 additional pounds to the rear suspension of your 2021 Tundra. If you don't haul anything heavy in the truck bed while you're towing, I'd recommend the SumoSprings # SSR-610-47 which would provide up to 1500 lbs of additional support and would more than cover the trailer's tongue weight and would work great for you.

If you'll be hauling heavy cargo while towing, the # SSR-610-54 you'd looked at which has a 2800 lb capacity would be a better choice.

I've linked to an install video that you might find helpful.

expert reply by: Mike L

1

Answer 1

I reached out to my contact at SuperSprings about the SumoSprings Solo Custom Helper Springs part #SSR-121-54 for a 2016 Ford Transit T350 chassis and they stated that the gap between the spring and contact point can vary by application as this…

view full answer...

Answer 2

The best way to choose the correct Sumo Springs for your 2001 Toyota Tundra is based off the tongue weight of the trailer you're going to be pulling and the overall capacities on your vehicle. The payload capacity on a 2001 Tundra is a maximum of…

view full answer...

Answer 3

For your 2018 Toyota Tundra SR5 4x4 I recommend the SumoSprings Solo Custom Helper Springs - Rear Axle #SSR-610-54 to give you the load leveling you desire. The SumoSprings have more of a progressive load support than the Timbren springs. Timbren has…

view full answer...

Answer 4

Since you want support, ride quality, and would prefer an economical price the SumoSprings Solo kit part #SSR-610-54 would be exactly what you want for your 2016 Toyota Tundra. This is the best blend of the things you are wanting and will do a great…

view full answer...

Answer 5

The SumoSprings Solo Custom Helper Springs #SSR-610-47 with a capacity of 1500-lbs will be a good choice since that camper is really only going to have a tongue weight of around 240-lbs maximum. If you're also carrying loads in the truck bed,…

view full answer...

Answer 6

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 7

If you are considering Timbrens like the #TDR1500DQ and the SumoSprings like the #SSR-307-47 for your 2022 Ram 1500 4x4, I recommend the SumoSprings #SSR-307-47. The SumoSprings will offer the same quality as the Timbrens in terms of suspension…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Personally I wouldn't go with Timbren's for your needs. They're essentially rubber bump stops that prevent your suspension from flexing when weights placed on the rear of your Canyon. The major issue with them is comfortability when you…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

Yes we do have a set of Timbrens that fit your 2024 Toyota Tundra with the part #T45MR. These can give you up to an additional 6,000 lbs of suspension support.

view full answer...

Answer 12

Hey Michael, thanks for reaching out! The Timbren Active Off-Road Bumpstops #T28GR you installed on your 2018 Ford F-150 unfortunately have that reputation among users (although Timbren claims their systems provide a smooth ride). Because of this we…

view full answer...