1998 Starcraft Stardust 1021 Axle Replacement

Question

Question:

Hello, I have a 1998 Starcraft Stardust 1021 popup. I am certain the torsion axle is shot, and it has tiny wheels/tires. I am looking to lift it for clearance and to run at least a 14 inch wheel/radial tire combo. I found this information that you guys put together for another individual. Timbren Heavy-Duty Axle-Less Trailer Suspension - 4inch Lift Spindle - Regular Tires - 2,000 lbs - ASR2KHDS04. etrailer Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 5 on 4-1/2 - AKHD-545-35-EZ-K will need two. Kenda Karrier ST205/75R14 Radial Trailer Tire with 14inch Black Mod Wheel - 5 on 4-1/2 - LR C - AM32131. 3 including spare. Would this provide enough lift to run the above listed 14 inch wheel/tire? Also what would be needed to install this axle system on my current frame? Thank you!

asked by: Aaron H

0

Expert Reply:

Yes you can use the Timbren Heavy-Duty Axle-Less Trailer Suspension - 4" Lift Spindle - Regular Tires - 2,000 lbs
# ASR2KHDS04 to replace your axle on a 1998 Starcraft Stardust Pop-Up.

The etrailer Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 4-1/2 # AKHD-545-35-EZ-K will work perfect on the Timbren and yes you will need to buy two.

The Kenda Karrier ST205/75R14 Radial Trailer Tire with 14" Black Mod Wheel - 5 on 4-1/2 - LR C # AM32131 will also work just fine with this set up.

I have linked the installation video for the Timbren Axle-Less system to help guide you.

expert reply by: David B

0

Answer 1

Thank you for the photo; it shows that you have a Torflex axle and we do have lift kits available for that type of axle. You will need to know your axle's weight capacity of the axle number for you to get the correct kit. That information should…

view full answer...

Answer 2

Most likely the Timbren Axle Less System part #A35RS545 would work well on your camper but you would need to compare the dimensional drawings I attached to the setup of your trailer to see if it would clear everything. The hubs are 5 on 4-1/2 inch…

view full answer...

Answer 3

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 6

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 7

Your math is correct in your trailer weight load example. If a fully-loaded tandem axle trailer weighs 4000-lbs then each of the 4 tires will bear 1/4th of that load, or 1000-lbs. In this case a tire rated for 1300-lbs would provide a good safety…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 10

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...

Answer 11

The Carrier Air V RV Air Conditioner is no longer produced so a direct replacement of the same unit is not an option. However, we do have available the two Advent AC models that are designed as replacement units for the Carrier Air V. I recommend…

view full answer...

Answer 12

You can add larger wheels and tires to a trailer as long as you have enough room for the larger size. The main clearance issues we find when putting larger tires and wheels on a trailer is from the top of the tire to the fender and from the inside…

view full answer...