Recommended Trailer Wiring Harness For A 2021 Jeep Grand Cherokee L

Question

Question:

Does this fit 2021 grand cherokee L or what is the right part?

asked by: Daniel W

0

Expert Reply:

The connectors for a 2021 Jeep Grand Cherokee and Grand Cherokee L will be different, so the Tekonsha # 118727 will not be correct for your vehicle.

With that said, you will need the Curt Vehicle Wiring Harness # C27BR for your 2021 Grand Cherokee L. This will be mostly plug and play for the install, but you will need to run one wire up to the battery for needed power. I included an install video we have of this being installed on a 21 Grand Cherokee L for you to check out as well.

expert reply by: Lazer S

0

Answer 1

For your 2021 Jeep Grand Cherokee L we have the Curt Trailer Hitch Receiver #C97JR which is a confirmed fit. This hitch has a 750 lb tongue weight rating and a 7,500 lb trailer weight rating so it will be plenty strong for carrying a bike rack or…

view full answer...

Answer 2

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 3

The etrailer Trailer Hitch item #e27KR weighs 46 lbs. It is custom fit and attaches to your 2022 Acura MDX with included hardware and does not require any drilling or welding. This hitch has a 2" x 2" receiver. I have linked an…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...