Is There a Replacement Lock Core for the Blaylock Door Lock for Enclosed Trailers DL80

Question

Question:

Can i purchase the lock that goes in the aluminum box

asked by: Tom M

0

Expert Reply:

The lock core on the Blaylock Door Lock for Enclosed Trailers part # BLDL-80 is not replaceable but if you lost your key we do carry these but you need to have your key code, printed on the key (list below). If not then you'll need to drill out the old lock core and replace the entire lock unfortunately.

expert reply by: Conner L

0

Answer 1

If all of your current locks are Blaylock locks, it may be possible. If they are a different brand, it is not possible to get them keyed alike. The Blaylock Door Lock for Enclosed Trailers part #BLDL-80 can be ordered keyed alike if you purchase…

view full answer...

Answer 2

If a thief has the time and opportunity they usually get what they want. If a thief was dedicated enough to breaking into your trailer that he would go the lengths you described to defeat the #BLDL-80 he would probably also find other ways (much…

view full answer...

Answer 3

The Trimax Puck Lock for Trailer Door Hasps #TMX96RR cannot be keyed alike. While disappointing I'm sure, there is another option to consider, which is to order a quantity of two of the Trimax Puck Locks for Trailer Door Hasps #TMX73FR. The…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

To create barn doors out of your ramp door, you will need hinges and a latch. I suggest a latch/lock system like the Universal Cam-Door Lock for Enclosed Trailers - 1" Keeper, #383200. This will use a 3/4 inch diameter pipe that you'll have…

view full answer...

Answer 6

We don't have an option that will allow for all of them to be keyed alike but I can get you down to one key for the hasp locks and another for the coupler lock. The Trimax Puck Locks for Trailer Door Hasps #TMX73FR comes with three keyed-alike…

view full answer...

Answer 7

Yes, the #100019-24 pigtail can be used to connect your dual-cylinder 100 lb propane setup to the regulator on your RV. Since this hose does not have a back-check to contain a gas leak, you will need the #204120-MBS fitting that includes a…

view full answer...

Answer 8

The Dexter Electric Trailer Brake Kit #23-105-106 are a replacement set for the 023-358-00. This kit includes a right and left brake assembly that is manually adjustable. I recommend the Dexter Nev-R-Adjust Electric Trailer Brake Kit #23-458-459 as…

view full answer...

Answer 9

When our installers replace a trailer hub, there isn't a set torque spec used when tightening the spindle nut. The hub is placed on the spindle, making sure the inner and outer bearings are correctly seated. The spindle nut is then run down until…

view full answer...

Answer 10

The Oil Cap Kit #RG04-250 is designed for standard 10K - 12K axles and has 3-3/4" diameter threads. This should do the trick for you but I do recommend measuring the diameter of your oil cap first as I wasn't able to find anything related to…

view full answer...

Answer 11

I spoke with my contact at Dutton-Lainson and he stated that the 203960B number that you pulled from your jack is a label number. That label was used on two different trailer jacks with a 1250 lb weight capacity, sidewind jack #6814 and topwind jack…

view full answer...