Recommended Trailer Hitch And Wiring For A 2022 Nissan Frontier

Question

Question:

What do you recommend for a trailer hitch and wiring for a 2022 Nissan Frontier??

asked by: James

0

Expert Reply:

For your 2022 Nissan Frontier, I recommend Wiring Harness # C56225.

As far as a hitch goes we do have a few options for your truck, however, I recommend one of best sellers, the etrailer Trailer Hitch Receiver # e98869. This is a custom made class III hitch designed specifically to fit your 2022 Frontier.

expert reply by: Bryce D

0

Answer 1

We can get your 2022 Nissan Frontier without the factory tow package set up with a 7-way and brake controller, and for the 7-way there is one part that is needed, though it will not be factory style, it will be a 7-way that you plug in and will…

view full answer...

Answer 2

So you will need to access the 12 pin jumper plug in your Frontier's cab, which as you said is on the passenger’s side behind the kick panel. This is where you will install the harness and relays that activate the trailer tow package, and…

view full answer...

Answer 3

Yes, the Draw-Tite Max-Frame Trailer Hitch Receiver item #75282 is a confirmed fit for your 2022 Nissan Frontier. It has a maximum gross trailer weight of 5,000 lbs and a maximum tongue weight of 750 lbs. I have attached an installation video and…

view full answer...

Answer 4

The main difference between a Class III hitch and a Class IV hitch is the capacities they set for the hitches. Class III hitches are rated for up to 6,000 lbs GTW with 600 lbs TW whereas a Class IV is rated for up to 12,000 lbs GTW and 1,000 TW. For…

view full answer...

Answer 5

I recommend the etrailer Trailer Hitch Receiver #e98869 for your 2023 Nissan Frontier. This receiver is custom fit and has a matte black finish for a factory appearance. There is a tab welded on the receiver that will accept the 4-way Mounting…

view full answer...

Answer 6

From what I can find on the 2022 Nissan Frontier, the plug for the brake controller that will let you use a harness like the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers #3050-P is located just above the OBD connector, taped tight…

view full answer...

Answer 7

There is a wiring kit that has both the 7-way and the 4 pole, if your truck already has a 7-way installed on it. You could remove the existing 7-way by unclipping it from the trailer wiring harness and replacing it with the #HM40975. If your truck…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The Draw-Tite Max-Frame Trailer Hitch Receiver #75282 will have the following bolt hole dimensions for your 2015 Nissan Frontier. The Bolt holes from drivers side to passenger side frame rails are 43-5/8" on center. The holes running from front…

view full answer...

Answer 10

Since your 2005 Nissan Frontier did not come with a tow package, I recommend trailer wiring harness #C56225. I have included a link to the installation details and a video showing a typical installation for you to view.

view full answer...

Answer 11

It sounds like there is a short on the trailer and that is what caused the lights to stop working after a brief amount of time. If you plan on towing with this trailer again I would recommend you go over the wiring of the trailer looking for an…

view full answer...

Answer 12

In your case it sounds like your 1999 Nissan Frontier already had the relays installed. So for you no, it would not be necessary to use the included relays. If the vehicle has a tow package most likely the relays are already in place. If you install…

view full answer...

Recommended Trailer Hitch And Wiring For A 2022 Nissan Frontier

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching