Replacement Lug Nut Cover for 2010 Keystone Springdale

Question

Question:

I need to find lug nut covers for my trailer. My measurement of the worn lug nut cover is 2.5inch x 1. I have 1 inch lug nuts on my trailer.

asked by: Ross F

0

Expert Reply:

The 1" replacement lug nut cover that we have available for your 2010 Keystone Springdale is the Wheel Masters Lug Nut Covers - Stainless Steel - GMC and Chevy - 1" - Qty 8 # WM8010. Stainless steel is the only color that we have them in.

expert reply by: Thomas M

0

Lug Nut Cover
(click to enlarge)

Answer 1

It sounds like there is a short circuit that is overloading the running light circuit in the tow package wiring on your tow vehicle. The most likely culprit is a dirty or corroded trailer connector on the vehicle or trailer if not both. The first…

view full answer...

Answer 2

The Wheel Masters Lug Nut Cover Pliers, part #WM8211, are designed to remove any size lug nut covers. Just pinch the lug nut cover with the pliers and pull the cover off.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

Hey Mark, from previous customers we have determined that the your 2009 Coachmen Chapparal M-278 has a Lippert 1621 pin box so the Gen-Y Gooseneck adapter part #GY58GR would fit and work great on it. This will give you a cushioned gooseneck adapter.…

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Hey Robert! Yes, the Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers #RM-2460-2570 can be used to replace the MORryde LRE suspension kit you currently have on your 2006 Keystone Montana. Just verify your axles have a 3"…

view full answer...

Answer 12

Since you have the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" Item #C13200 on your 2017 Toyota Highlander you aren't limited to a certain type of rack because your hitch is a class III hitch receiver. Both the Thule Apex XT 4…

view full answer...