Comparison of Trailer Hitches and Recommendation for 2022 Subaru Ascent

Question

Question:

I need a hitch for my 2022 Subaru Ascent, but don't know which one to get. What's the difference between the available hitches? Which one should I choose? Thanks!

asked by: Del

0

Expert Reply:

We offer two styles of hitches for your 2022 Subaru Ascent, a fully visible model such as the Curt # C13400 or the etrailer brand # e35ZR or the partially concealed Curt # C25VR and etrailer # e55ZR.

The # C13400 or # e35ZR mount to the underside of the frame members, and the entire hitch and receiver tube is fully visible from the rear of the vehicle. The receiver tube will sit just below the rear bumper.

The # C25VR and etrailer # e55ZR install behind the bumper cover, and will actually replace the bumper beam. When installed, the receiver will actually pass through the removable panel in the bumper, so it can be completely concealed when not being used. The installation is certainly more involved, but the install is much cleaner looking, and doesn't affect the vehicle's ground clearance.

If I had to personally choose between the options mentioned above, I'd choose the etrailer # e55ZR because I prefer the concealed appearance and I prefer the matte finish used on the etrailer hitches versus the glossy powder coat used on the Curt product.

If you'll be towing with the hitch, you'll need a trailer wiring harness like # 118790 for a 4 pole connector or # 118290 for a 7-way. The ball mount you use will depend on which style of hitch you choose. If you go with the fully visible model, use the # D-28. For the concealed hitch, use # C45100. For either hitch, you'll need a # PC3 hitch pin, and # 19260 for a 1-7/8 or # 63845 for a 2 inch trailer ball.

I've linked to some installation videos that you might find helpful.

expert reply by: Mike L

0

Answer 1

To install a 7-Way harness on your 2023 Subaru Ascent, without the towing package, you will need two separate wiring harnesses because they don't make just one that'll do the job. The first harness you'll need is the Curt T-Connector…

view full answer...

Answer 2

The best hitch receiver for hauling a bike with your 2022 Subaru Ascent is going to be the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" item #C25VR. This hitch receiver mounts behind your rear bumper bar instead of below your…

view full answer...

Answer 3

I will start by saying that the Anderson Rapid Hitch #AM3414, though a little overkill, is definitely a good adjustable ball mount and it will serve your needs well. To get a hitch that will handle this and still be hidden once installed on your 2022…

view full answer...

Answer 4

There are some slight differences between the Draw-Tite #76253 and the Curt #C25VR, but it's mostly down to the quality of the powder coat on the two hitches. The powder coating on the Curt hitches is traditionally applied a bit thicker and is a…

view full answer...

Answer 5

The Curt Trailer Hitch Receiver part #C25VR is the same as a U-Hual Trailer Hitch Receiver part CMF13448 and they are both fits for a 2020 Subaru Ascent.

view full answer...

Answer 6

You are correct that the Curt Trailer Hitch Receiver #C25VR and Draw-Tite #76253 you were looking at for your 2021 Subaru Ascent are very similar. They both share pretty much the same design, and both have a 750lb tongue weight rating and 5,000lb…

view full answer...

Answer 7

The Curt #C25VR and Draw-Tite #76253 will actually be very similar to each other. Both will install the same way and will be completely hidden once completed due to the removable panel on the bumper fascia. However, there are a few differences. The…

view full answer...

Answer 8

The Curt Trailer Hitch Receiver 2" part #C25VR is a fit for the 2020 Subaru Ascent. The Curt hitch is hidden behind the removable fascia panel at the rear the Subaru. When the hitch is not in use the panel can be replaced for a completely hidden…

view full answer...

Answer 9

The connector you are looking for to install the Curt trailer wiring kit part #C56040 on your 2019 Subaru Ascent is located behind the driver side rear panel in the cargo area. If you check out the picture I attached you'll see where to find it.

view full answer...

Answer 10

There are a pair of trailer hitch receivers for your 2022 Subaru Ascent for a hitch-mounted bike rack that can be considered the best, as the only difference is the powder coating on each hitch: - etrailer Trailer Hitch Receiver #e55ZR - Curt Trailer…

view full answer...

Answer 11

We currently offer several different hitches for the 2022 Subaru Ascent. Two that are concealed that will be hidden behind the removable panel on the bumper when not in use, and two that sit below the rear bumper and will be fully visible from the…

view full answer...

Answer 12

The Curt #C25VR, etrailer brand #e55ZR and Draw-Tite #76253 are all essentially identical. All three have the same 5000 lb towing/750 lb tongue weight capacity, all are almost identical from a visual standpoint and all three would install in the same…

view full answer...

Comparison of Trailer Hitches and Recommendation for 2022 Subaru Ascent

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching