Trailer Hitch Receiver Fit For 2022 Subaru Legacy

Question

Question:

When do you expect to get a trailer hitch for a 2022 Subaru Legacy? Thanks!

asked by: Gregory S

0

Expert Reply:

We actually have a trailer hitch receiver that fits a 2022 Subaru Legacy right now! It is a Class III, 2" hitch receiver, and is the following part number:

- etrailer Trailer Hitch Receiver # e25TR

There is even a 4-way trailer wiring harness that fits a '22 Legacy if you were planning on doing some light towing, the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C79CR.

expert reply by: Kyle S

0

Answer 1

The Draw-Tite Max-Frame Trailer Hitch Receiver #DT73RR that you found is confirmed to fit your 2022 Subaru Legacy. For towing, your 2022 Legacy will need the Vehicle Wiring Harness #C79CR which is vehicle specific.

view full answer...

Answer 2

The Draw-Tite Max-Frame Trailer Hitch Receiver part #DT73RR is a confirmed fit for a 2020 Subaru Legacy (All Models Including Base, Premium, Sport, Limited, Limited XT and Touring XT) and what I recommend since it offers the easiest bolt-on…

view full answer...

Answer 3

The Curt Class III hitch, part #C67JR is a fit for all models of the 2020 and 2021 7th Gen Subaru Legacy, including the Touring XT. If you'll be using the hitch for towing, you'll also need a trailer wiring harness like #C79CR, a ball mount…

view full answer...

Answer 4

The Stealth Hitches Hidden Rack Receiver item #391SUOB20 you selected will not fit your 2020 Subaru Legacy. The closest equivalent hitch receiver that is compatible with your 2020 Legacy is the EcoHitch Hidden Trailer Hitch Receiver item #EH36RR.…

view full answer...

Answer 5

The trailer hitch we offer for a 2020 Subaru Legacy with the best ground clearance is the Curt Trailer Hitch Receiver part #C67JR as it sits directly underneath the rear bumper. The Draw-Tite Max-Frame Trailer Hitch Receiver part #DT73RR would sit…

view full answer...

Answer 6

Since there were no changes to the Subaru Legacy in 2022 the etrailer hitch part #e25TR is a confirmed fit for it. Then for trailer wiring we have the Curt #C79CR which would work great as well.

view full answer...

Answer 7

According to Curt, the #C67JR Class III hitch fits all models of the 2021 Subaru Legacy, including the Premium and Sport. The only near-plug and play trailer wiring harness available would be the Curt #C79CR which does require that a circuit be ran…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 10

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 11

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 12

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...