Rhino Rack Y02-490-NT Crossbar Availability

Question

Question:

I have a 2021 Mercedes Metris Getaway Camper Van with a pop up roof. The roof includes two front to back rails. I am told by the upfitter that the cross brackets for those rails are the Rhino Rack Y02-490-NT cross cross bars. Do you sell them?

asked by: Bob S

0

Expert Reply:

Yes, we carry the Rhino-Rack Roof Rack for Factory Tracks # Y02-490B-NT. The base of these Rhino Rack legs easily mount into Thule or Yakima roof-rack tracks.

If you don't have those kind of mounts then send me in a picture and I can find the correct base/crossbar combination to connect to the roof of your 2021 Mercedes-Benz Metris.

expert reply by: Kevin C

0

Answer 1

Yes you can certainly install a 59" crossbar setup such as Rhino-Rack Roof Rack for Factory Tracks - 2 Vortex Aero Crossbars - Black - 59" Long #Y02-490B-NT onto your RetraxPRO XR Hard Tonneau Cover - Retractable - Aluminum - Matte…

view full answer...

Answer 2

From the sounds of your question, it sounds like you have factory track OEM rails on the roof of your 2015 Jayco 1207UD Say Series camper. If this is the case, I recommend the following parts: - Rhino-Rack Roof Rack for Factory Tracks - 2 Vortex…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 6

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 7

Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch #Y01126, 54 inch #Y01127, and 60 inch #Y01135 lengths. These tracks…

view full answer...

Answer 8

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 9

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 10

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...

Answer 11

Hi Steve, thanks for the question, and we do indeed have the correct mounting panel for the Redarc Tow-Pro Liberty #RED24FR on your 2007 Toyota Tacoma. What you need is the following: - Mounting Panel for Redarc Tow-Pro Trailer Brake Controller…

view full answer...

Answer 12

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...