Do Truxedo Stake Pockets # TX22AR Fit 2020 Ram 1500

Question

Question:

The number is not clear in the photo. Can you please confirm what it is ? and are all 4 parts the same ? Thanks.

asked by: Paul S

0

Expert Reply:

While I was not able to verify the number on the back side of the TruXedo Stake Pocket Covers part # TX22AR I can confirm that this does fit your 2020 Ram 1500 and all 4 are the exact same.

expert reply by: Jameson C

0

Answer 1

Yes, the TruXedo Stake Pocket Covers - 6' Bed Dodge Ram #TX22AR will fit your 2021 Ram 1500 with the factory plastic bed rail. These stake pocket covers will fit the 5-1/2' and the 6-1/2' beds, has an easy snap-in…

view full answer...

Answer 2

There are actually 2 different sized caps included with the TruXedo Stake Pocket Covers #TX22AR. This is due to the 2009 to 2021 Dodge Ram trucks having slightly different sized stake pockets in the front and rear. I can't remember which is…

view full answer...

Answer 3

I spoke to my contact at Truxedo and she told me the official color of the TruXedo Stake Pocket Covers - 2009-2021 Dodge Ram #TX22AR is black.

view full answer...

Answer 4

My TruXedo representative confirms that the #TX22AR Stake Pocket Covers are indeed compatible with the factory installed black plastic covers on the tops of the bed sides.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has…

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

To replace your NOK AD2527E seal you can use #168233. It has an inner diameter of 1.688 inches and an outer diameter of 2.332 inches. Based on what I could find on the NOK AD2527E the inner diameter is the same and the outer diameter is 2.328 inches.…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Do Truxedo Stake Pockets # TX22AR Fit 2020 Ram 1500

Product Page this Question was Asked From

Continue Researching