Will The TruXedo Stake Pocket Covers Fit The OEM Bed Rails On A 2021 Ram 1500 W/ A 5-1/2' Bed?

Question

Question:

Will these fit over the factory plastic bed rail

asked by: Rod T

0

Expert Reply:

Yes, the TruXedo Stake Pocket Covers - 6' Bed Dodge Ram # TX22AR will fit your 2021 Ram 1500 with the factory plastic bed rail.

These stake pocket covers will fit the 5-1/2' and the 6-1/2' beds, has an easy snap-in installation, and will help maintain a smooth appearance along the bed rails.

Attached is a product overview video for you to check out if you haven't already.

expert reply by: Bryce D

0

Answer 1

Yes, we carry the 1706707 as the TruXedo Stake Pocket Covers #TX86QV, which will come with six stake pocket hole covers for a 2022 Ram 3500 with an 8' bed. For a short bed you would need the TruXedo Stake Pocket Covers #TX22AR, which would come…

view full answer...

Answer 2

The Aries Nerf bars #AA4445044 are rated for a static weight of 500 lbs according to my tech contact at Aries.

view full answer...

Answer 3

While I was not able to verify the number on the back side of the TruXedo Stake Pocket Covers part #TX22AR I can confirm that this does fit your 2020 Ram 1500 and all 4 are the exact same.

view full answer...

Answer 4

There are actually 2 different sized caps included with the TruXedo Stake Pocket Covers #TX22AR. This is due to the 2009 to 2021 Dodge Ram trucks having slightly different sized stake pockets in the front and rear. I can't remember which is the…

view full answer...

Answer 5

I spoke to my contact at Truxedo and she told me the official color of the TruXedo Stake Pocket Covers - 2009-2021 Dodge Ram #TX22AR is black.

view full answer...

Answer 6

My TruXedo representative confirms that the #TX22AR Stake Pocket Covers are indeed compatible with the factory installed black plastic covers on the tops of the bed sides.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 11

When installing/adjusting the Solera RV Slide-Out Awning #LCV000163285 tension is applied by rotating the awning roller 14 times. This should apply the needed spring tension so that the fabric doesn't billow in the wind or leave enough slack that…

view full answer...

Answer 12

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Will The TruXedo Stake Pocket Covers Fit The OEM Bed Rails On A 2021 Ram 1500 W/ A 5-1/2' Bed?

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching