Hitch that Fits 2022 BMW X3 M Sport

Question

Question:

Good Afternoon, Need a Hitch for my 2022 BMW X3 MSport it was supposed to come with one but was d in the build. Thank You!

asked by: Manuel A

1

Helpful Expert Reply:

For your 2022 BMW X3 M Sport the Draw Tite hitch part # 76226 is a confirmed fit as we have verified with them that it fits all models of the X3 including the M Sport.

I attached an install video for this hitch for you to check out as well.

expert reply by: Jameson C

1

Answer 1

I checked with Tekonsha and they show the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part #TK77FR as a fit for all models of the 2021 BMW X3, including the X3 M so it will fit and work well for you. The harness features a…

view full answer...

Answer 2

Really good questions, and I did some digging into the installation of both the Curt Trailer Hitch Receiver #C13387 and Draw-Tite Trailer Hitch Receiver #76226 that fit your 2018 BMW X3. In regards to why the exhaust hanger nuts need to be removed…

view full answer...

Answer 3

The Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat #TK77FR will definitely fit your 2020 BMW X3 with the M package. Though you do need to run a wire up to the battery for needed power, this will be a plug and play harness, so it is a lot…

view full answer...

Answer 4

You are correct in that your 2021 BMW X3 M40i isn't actually from the actual M division, so it does make the correct wiring look difficult to locate. However, the 2021 model year makes life significantly easier as the Tekonsha T-One #TK77FR…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 9

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 10

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 11

Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…

view full answer...

Answer 12

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Hitch that Fits 2022 BMW X3 M Sport

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching