What Wiring Harness Do You Recommend for My Small Trailer?

Question

Question:

I own a 1999 floe pro 100 plus Im looking for a complete wiring harness for the trailer. Thank you

asked by: John M

0

Expert Reply:

I did some research on your 1999 Floe Pro 100 Plus, and judging by the size of the trailer, you need the Wesbar 4-Way Flat Trailer Wiring Harness - 20' Long # 002220 or the longer 4-Way Wishbone Trailer Wiring Harness with 42" Ground Wire - 40' Long # A40W42B.

With the 4-way flat, you will get turn signals, running lights, and brake lights. If you are looking for something other than a 4-way flat harness for your trailer, please feel free to respond with your needs.

expert reply by: Bob C

0

Answer 1

From all the photos I saw online, it looks like Floe used grommet mounted 2-1/2 inch marker lights and standard 6-1/2 by 2-1/2 inch oblong taillights. If that's the case, for the amber 2-1/2 inch I would recommend #MCL59AB and #MCL59RB for…

view full answer...

Answer 2

I am a little confused as to were the connector is, on the truck or on the trailer. Brown wires are typically associated with running lights. If there are 2 wires coming out of that pin and we are talking about the trailer side then you have what is…

view full answer...

Answer 3

We have a combination of a few kits that will get you the parts you are talking about, but we do not have a kit like the Universal Wiring Kit #ETBC7 without the connector and mounting bracket. If you purchase the Hopkins Trailing Wiring Installation…

view full answer...

Answer 4

The "80" you are referring to is the width of the trailer, and it makes it easier to determine the light kit you need. Since you need tail lights as well as running lights, I recommend the Trailer Light Kit for Trailers Over 80" Wide…

view full answer...

Answer 5

It sounds like your trailer has the 6-1/2 inch Oval stop turn and tail lamps and some side marker lamps that use a rubber grommet like the 6-1/2 inch oval tail lights grommet, #A70GB. Since the area where your lights are mounted is not accessible…

view full answer...

Answer 6

Most trailer wiring that runs to trailer lights is 16 gauge. I would rather people use 14 or 12 unless the lights are LED which draw considerably less. But for most people 16 gauge works just fine for basic trailer lighting. If you are planning on…

view full answer...

Answer 7

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 11

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...