How to Unlock the Heininger Holdings Advantage Threaded Trailer Hitch Lock?

Question

Question:

Hi, I put this on several months ago. Now I cant get it to unlock. Am I forgetting how it works? Just put the key in and turn? I get no movement from the key in barrel. Thanks for any advice.

asked by: Alex D

1

Helpful Expert Reply:

I have attached a video that shows how the Heininger Holdings Advantage Threaded Trailer Hitch Receiver Lock item # HE6033 functions. Your hitch may have gotten some dirt in it. I recommend spraying it down with WD-40 and making sure you get it down into the connection point really good. Let it sit for a little while then try opening it again.

expert reply by: Jerred H

1

Answer 1

I reached out to my contact at Malone and the Anti-Rattle Hitch Lock For Malone Cargo Carries or Bike Racks #MPG2174 is a 1/2" - 13 bolt. If you are wanting to use this bolt in a rack that isn't made by Malone, you will need to confirm its…

view full answer...

Answer 2

You can use the Advantage Threaded Trailer Hitch Receiver Lock, #HE6033, on the cargo carrier, #63155, but the shank in the cargo carrier is not threaded so the lock will not function as an anti-rattle device, just a lock. If you are just looking for…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 5

I recommend the Roadmaster Dual Hitch Receiver Adapter, 10" Drop/Rise item #RM-077-10. This adapter was designed for this type of set up. Your Jeep Rubicon and Swagman E bike rack weigh well below the 10,000 lbs maximum capacity of this hitch. I…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The Westin Truck-Pal Fold-Up Bed Ladder, Item #10-3000 is a universal fit that would work great on your F-150. It is mountable on trucks with bed covers and tailgates on trucks that are 38 inches or less from the graound. The ladder stores on and…

view full answer...

Answer 8

The Convert-A-Ball step gate #CAB-SG does have a 90 degree piece on the bracket that attaches at the very end of the tailgate. Since this 90 degree piece sits on the outer edge of the tailgate, it does not look like you will be able to install the…

view full answer...

Answer 9

Yes, the ladder portion of the Westin Truck-Pal Fold-Up Bed Ladder, part #10-3000, can be removed from the mounting bracket when not in use.

view full answer...

Answer 10

The Heininger PortablePET Twistep Hitch Mounted Step #HE3052 can be set to several different heights. This can be seen in the linked video at the :43-second mark. 4 bolts are used to set the platform height. At the lowest height setting the TOP of…

view full answer...

Answer 11

I have reviewed the installation instructions for the Draw-Tite Class II hitch, part number 36336. There is no indication of cutting the fascia or bumper for the 1999 Toyota Camry. The receiver opening sits flush with the rear fascia or bumper cover.…

view full answer...

Answer 12

I would recommend the Draw-Tite Class II Draw-Tite Hitch, part #36336. It is the most popular hitch we sell for your vehicle.

view full answer...

How to Unlock the Heininger Holdings Advantage Threaded Trailer Hitch Lock?

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching