Will Curt 5th Wheel/Gooseneck Wiring Harness Fit a 2022 Ford F-350 Super Duty

Question

Question:

Before I pick up this wiring harness I just want to make sure it works with my 2022 F-350.

asked by: Tanya

0

Expert Reply:

Yes, the Curt 5th Wheel/Gooseneck Wiring Harness # C57010 is confirmed to fit your 2022 Ford F-350 Super Duty.

expert reply by: Robin H

0

Answer 1

The Curt 7-way harness part number 56443 is our part number #C69CR which is a confirmed fit for your 2022 Ford F-350 as a replacement 7-way. We do not carry the YAW/TPMS harness you are looking for.

view full answer...

Answer 2

Congrats on the new truck! To add a gooseneck hitch to your 2023 Ford F-250, I recommend the Curt Custom Underbed OEM-Style Gooseneck Trailer Hitch item #C60700. This system is custom fit and installs in predrilled holes. It fits both the 6-3/4'…

view full answer...

Answer 3

To make towing with a 5th wheel trailer easier, I recommend adding the Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector for Aluminum Beds item #C57010 to your 2023 Ford F-350. This harness puts a 7-way connector in the bed of your…

view full answer...

Answer 4

The Adapter Rails for Curt 5th Wheel Hitch #C88KR that you mention for your B&W Patriot 5th Wheel Trailer Hitch w/ Slider #BWRVK3270 will only add about 2-1/2" of height. With the B&W Patriot #BWRVK3270 measuring in at 17-19" in…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 12

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Will Curt 5th Wheel/Gooseneck Wiring Harness Fit a 2022 Ford F-350 Super Duty

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching