Recommended Gooseneck Towing Parts for 2021 Chevy Silverado 2500

Question

Question:

I already have the puck system in my 2021 Silverado 2500. What do I need for the gooseneck hole to put a BandW turnover ball in my truck?

asked by: Matt M

0

Expert Reply:

You simply need the B&W Ball and Safety Chain Kit, # BWGNXA2061 for your 2021 Chevrolet Silverado 2500. This fits the center hole for the gooseneck ball and the safety chain loops fit into the pucks to the sides.

expert reply by: Michael R

0

Answer 1

The B&W Ball and Safety Chain Kit #BWGNXA2061 is the correct gooseneck ball for your 2022 Ford F-450 with the factory in bed prep/puck system. The kit includes the 2 safety chain connectors that fit into the outer mounts as well as a carry case…

view full answer...

Answer 2

There are some dimension differences between the two B and W ball kits you mentioned but since you have a 2021 Ford F-250 with the OEM rail kit the correct kit you'd want is the part #BWGNXA2061 and not the #BWGNXA2062 which fits Ram trucks. So…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Normally trailer coupler height is around 17 inches, from the ground to the bottom of the coupler, and most hitch manufacturers design their hitches to work with a ball mount that will end up very close to this measurement. I am including a link to…

view full answer...

Answer 8

Between the Curt #C60692 and B&W #BWGNXA2061 that will fit your 2022 GMC Sierra 3500 with the factory pucks/prep package, I do prefer the B&W. Though both the Curt and B&W are rated up to 30,000 pounds and will fit your truck perfectly,…

view full answer...

Answer 9

Yes, a trailer that is nose up can cause big problems. A level trailer is ideal and worth working toward for safety. The good news is that you can get the trailer almost exactly level with switching ball mounts. This is where an adjustable ball mount…

view full answer...

Answer 10

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 11

I recommend using the B&W Ball and Safety Chain Kit #BWGNXA2061 for the factory puck system on your 2020 Ford F-350 Super Duty. I like this kit of the Curt #C60692 and Reese #RP30137 options because it uses a handle to secure the gooseneck hitch…

view full answer...

Answer 12

The best gooseneck hitch ball kit for your 2019 Ford F-350 Super Duty with the factory gooseneck is the B&W Ball and Safety Chain Kit #BWGNXA2061 because its hitch ball is simple to put in or remove and B&W is known for making the most…

view full answer...