Base Plate Kit For A 2020 Jeep Cherokee Trailhawk

Question

Question:

Is there a blue ox base plate kit that fits my 2020 jeep cherokee trailhawk

asked by: Rick H

0

Expert Reply:

For your 2020 jeep Cherokee Trailhawk, we do have a Blue Ox base plate kit for you. The Blue Ox Base Plate Kit # BX1143 is a direct fit specifically for your vehicle and will bolt directly to the frame so no welding will be required.

Since you mentioned wanting a base plate, you may need a tow bar that is compatible with it. The Blue Ox Avail Non-Binding Tow Bar # BX7420 is a great choice and features a self aligning design to allow for easy hookup.

expert reply by: Bryce D

0

Answer 1

From what I could find out, the Mopar Recreational Flat Tow Wiring Kit will not be needed for a 2020 or 2021 Jeep Cherokee Trailhawk. This was only a requirement on a 2014 to 2018 as the issue this was designed to combat has since been rectified.…

view full answer...

Answer 2

The base plate kit part #e98951 that you referenced is a confirmed fit for your 2019 Jeep Cherokee Trailhawk and would be an easy kit to use and install. Then for the etrailer SD tow bar you'd want the part #e34ZR as the one you mentioned…

view full answer...

Answer 3

The correct Blue Ox Base Plate Kit for a 2021 Jeep Cherokee Trailhawk is part #BX1143. The Trailhawk models all have tow hooks which the base plate kit actually replaces so there will be no issues. This will work great with the Blue Ox Alpha Tow…

view full answer...

Answer 4

It order to flat-tow a 2021 Jeep Cherokee Trailhawk you'll need a few different parts such as a base plate kit, tow bar, wiring, safety cables, and braking system. I have attached for you below a full, complete list of recommended parts.…

view full answer...

Answer 5

In order to flat-tow a 2020 Jeep Cherokee Trailhawk you'll need a base plate kit, tow bar, safety cables, wiring harness, a supplemental braking system, and possibly a few other things. I will list my recommendations for each of these…

view full answer...

Answer 6

I'd set aside a few hours to install the etrailer Invisible Base Plate Kit #e98951 on a 2021 Jeep Cherokee as it does require removing the front fascia. The install itself is not overly difficult though. I attached a link to an install video…

view full answer...

Answer 7

We have base plate kit install videos for the kits that fit your 2019 Jeep Cherokee that I attached to this page for the Demco part #DM9519340 and the Roadmaster #RM-521451-5 but for the Blue Ox #BX1143 we only have set of detailed install…

view full answer...

Answer 8

The tow bar I recommend if you want to safely tow your 2014 Jeep Wrangler Unlimited around tight or sharp corners is the Blue Ox Avail Tow Bar #BX7420. The self-aligning arms telescope to automatically center and lock in place, and the wide arms…

view full answer...

Answer 9

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 10

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

Hello Curtis. You can absolutely use an RV mount tow bar with your 2006 Ford E350 Van. For example, the Blue Ox Avail Non-Binding Tow Bar #BX7420 is compatible with any 2" hitch receiver. This could be on a motorhome, van or pickup truck.…

view full answer...