B&W Turnover Ball Goosneck Hitch Fit for 2021 Chevy Silverado 1500 Short Bed

Question

Question:

Will this work for a 2021 chevy silverado RST and the bed is either 6 1/2 or 5 3/4 is there a difference in the size for Bandw hitch or will either work

asked by: Levi

0

Expert Reply:

The B&W # BWGNRK1019 Turnover Ball Gooseneck hitch is compatible with all bed lengths of the 2021 Chevy Silverado, including those in the RST trim.

If you'd like to install a 7-way trailer connector in the truck bed so you don't need to run the trailer connector cable up over the tailgate, you can do so using part # C56000.

expert reply by: Mike L

0

Answer 1

The correct B&W Turnoverball Underbed Gooseneck Trailer Hitch for a 2020 Chevrolet Silverado 1500 is part #BWGNRK1019. The 4" hitch ball opening will need to be drilled 44-1/8" from the rear edge of the truck bed. Please note,…

view full answer...

Answer 2

For your 2021 Chevrolet Silverado 1500, we have the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit #BWGNRK1019 which will fit your vehicle and includes everything needed for installation. This hitch will fit the…

view full answer...

Answer 3

The only gooseneck trailer hitch option for a 2021 GMC Sierra 1500 is the B&W Turnoverball Underbed Gooseneck Trailer Hitch part #BWGNRK1019. The Turnoverball has a removable hitch ball design for a clean bed while not in use and it's a…

view full answer...

Answer 4

I did some checking and it looks like on springs that are 25-1/4 inches in length measured from eye to eye you will want the distance from the first hanger to the second to be 29-1/2 inches, from the second hanger to the third you will need it to…

view full answer...

Answer 5

There will be different dimensions between the hangers. From front to back your hangers for that 20-3/8 inch spring like #e84SR will be 24-3/4 on center then 29 inches on center and finally 24-3/4 inches on center. This will put each of the 3 axles…

view full answer...

Answer 6

The Dexter Heavy Duty Suspension Kit #K71-360-00 is designed for 33 inch axle spacing. To add your third axle, you cannot simply add a hanger spring and axle. You can keep your 35 inch spacing but you will need to relocate your hangers. I've…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Yes you are - all 5th wheel hitches are going to require some type of rails in order to be used. So you'd need #DM8552016-71 for your 2006 Dodge Ram.

view full answer...

Answer 11

If your Ford F-450 has an actual bed and is not a cab and chassis model (with a service bed or flatbed) then you can use the Curt universal folding gooseneck ball rail kit #C61502. You could then use Curt hitch #C-52 or #C65500. A custom hitch for a…

view full answer...

Answer 12

Hey Eric, the Curt Multi-Fit Ball Kit w/ 4" Offset for Chevy/Ford/GMC/Nissan Underbed Gooseneck Hitch #C68ZV is not going to work with your Ram, unfortunately. This one is only going to work for select YMM (Year Make Model) Ford 250-450s, GMC…

view full answer...