Differences in Hitches Available for 2021 Subaru Forester

Question

Question:

There are several 2 inch hitch choices for a 2021 Subaru Forester. Which one do I need? I have a 2 inch cargo tray and I'll tow a small kayak trailer every now and then.

asked by: James T

0

Expert Reply:

There are three types of hitches available for your 2021 Subaru Forester. I'll run through them below:

• Traditional Fully Exposed Hitch like Curt # C13409. The fully exposed hitches are typically the easiest to
install and the least expensive option.

• Partially Concealed Hitch like Curt # C47HR. These would be more expensive as well as being more
difficult to install, as shown in the linked video. However, the only visible portion of the hitch would be the
receiver tube and the safety chain loops, so this is the perfect choice for folks that don't like the
appearance of a traditional hitch.

• Fully Concealed Hitch like the Stealth # SH77GR which features a removable receiver tube and draw bar
that makes the hitch completely concealed once the receiver of drawbar is removed. This is the most
expensive option with the most time consuming installation. However, if you want the appearance of the
rear of the vehicle to be completely unchanged unless you're towing, this would be the option for you.

I'd personally choose a partially concealed hitch like the Curt # C47HR, as it's not completely exposed still fairly reasonably priced.

You'll also need a wiring harness like # 118467, a ball mount like # 2753 and a trailer ball like # 19260 for a 1-7/8 or # 63845 for a 2 inch ball.

expert reply by: Mike L

0

Answer 1

I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" #76271. This is a custom fit hitch that lets you carry a bike rack, cargo carrier or trailer with your Subaru Forester. It comes with the hardware kit, it…

view full answer...

Answer 2

I agree that while it is up to the consumer and either way is the correct way to do it in the end that when installing the Curt Trailer Hitch Receiver part #C13409 that the heat shield should be re installed. If for no other reason just to add a…

view full answer...

Answer 3

While the Curt #C13409 and Draw-Tite #76271 both have a 525lb tongue weight, 3,500 maximum gross trailer weighting and 5/8" pin hole with similar safety chain openings and ground clearance, there are some differences. The Draw Tite #76271 is my…

view full answer...

Answer 4

The steps for installation for the Draw-Tite Max-Frame Trailer Hitch Receiver #76271 and the Curt Trailer Hitch Receiver #C13409 are based on what each manufacturer found to work best for installing the hitch they designed. They are not 100%…

view full answer...

Answer 5

There is only one main difference between the Curt Hitch #C13409 and the Draw-Tite Hitch #76271 for the 2021 Subaru Forester. That difference involves the bumper clearance measurement of the shanks. While the Curt measures 4 inches from the center of…

view full answer...

Answer 6

The Draw-Tite Max-Frame Trailer Hitch Receiver #76271 will fit and work great for your 2022 Subaru Forester whether you have the base model or the Wilderness. The only thing to keep in mind is that you do need new hardware as hitch hardware is only…

view full answer...

Answer 7

The main difference between these three hitches is going to be the looks and install time. EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - Class III - 2" #306-X7391. Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C13409.…

view full answer...

Answer 8

I would be happy to clarify! You are correct that for your 2021 Subaru Forester there are two different Class III trailer hitch receivers available, the Curt #C13409 and the Curt #C47HR. The main difference between these two hitches is the #C13409…

view full answer...

Answer 9

I recommend the Stealth Hitches Hidden Rack Receiver #SH65MR for your 2021 Subaru Forester. This receiver features a removable Receiver Attachment #391RR2 that will allow you to remove any portion of the receiver that mounts below your bumper when…

view full answer...

Answer 10

The best trailer hitch we have for your 2019 Subaru Forester is the Draw-Tite Max-Frame Trailer Hitch Receiver part #76271. The reason that this is the best trailer hitch for you is because it is a custom fit which means no cutting or drilling is…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...