Is Everything I Need to Install the Roadmaster Rear Anti-Sway Bar # RM-1139-173 on 2017 Ford F-250

Question

Question:

Is everything included for install or do I need other components?

asked by: Marty B

0

Expert Reply:

The Roadmaster Rear Anti-Sway Bar # RM-1139-173 contains the polyurethane bushings and mounting hardware to install onto your 2017 Ford F-250. The only extra item you would need is the end link kit. The sway bar and end link kit is available in one package, the Roadmaster Rear Anti-Sway Bar and End Link Kit
# RM-1139-173-00.

This kit will be everything you need to install the rear anti-sway bar on your 2017 Ford F-250.

expert reply by: Thomas M

0

Answer 1

Basically, one friction-style sway control can be used for trailers with up to 6,000-lb GTW. If your trailer's GTW is between 6,000 lbs and 10,000 lbs, you will need two sway-control units, one on each side of the trailer. You will also want to…

view full answer...

Answer 2

The B355 endlinks that come with the End Link Kit for Roadmaster Rear Anti-Sway Bar for Pickup Trucks #RM-590170-00 have a center hole measurement of 14 inches, while the overall length is 15-1/2 inches. I've attached a diagram to illustrate. The…

view full answer...

Answer 3

This is correct. For your 2020 Ford F-350 you will want to use the Roadmaster Rear Anti-Sway Bar #RM-1139-173 and End Link Kit for Roadmaster Rear Anti-Sway Bar for Pickup Trucks #RM-590170-00. These are the correct parts for your truck, but because…

view full answer...

Answer 4

Good question, and while we do have a rear anti-sway bar for your 2019 Ford F-350 Super Duty, the #RM-1139-173 is only for trucks that already have one, and there isn't a hardware kit that will allow installation of this anti-sway bar on a truck…

view full answer...

Answer 5

I have confirmed with my contact in the Tech. Services department at Roadmaster that you will need the #RM-590170-00 end link kit. You can order the kit and see current pricing by clicking the provided link.

view full answer...

Answer 6

Thank you for the questions about the Roadmaster Rear Anti-Sway Bar and End Link Kit #RM-1139-173-00 for your 2015 Ford F-350 Super Duty. I spoke with my contact at Roadmaster who wasn't sure why they don't have specific instructions for the…

view full answer...

Answer 7

I took a look at what we have for your 2006 Ford F-250, and I was able to find the End Link Kit for Roadmaster Rear Anti-Sway Bar for Pickup Trucks #RM-590170-00. These are the same end links used in the Roadmaster Rear Anti-Sway Bar #RM-1139-170…

view full answer...

Answer 8

There are a few different options for your 2017 Ford F-350 Super Duty (crew cab, long bed, diesel) depending on the application. I'll list them below: Part #RM-1139-173 - 1-3/8 diameter factory replacement - Designed for single rear wheel pickups…

view full answer...

Answer 9

There will be no issues at all installing a rear sway bar and air bag kit on your 2015 Ford F-250. As examples, the Firestone #F2597 will install in a different location than the Roadmaster #RM-1139-173-00. I included install videos of both of these…

view full answer...

Answer 10

I am not familiar with Lift Master airbags but the Roadmaster Rear Anti-Sway Bar for Pickup Trucks part #RM-1139-173 which is a fit for your 2014 Ford F-250 is just a replacement rear anti-sway bar for the factory anti-sway bar so there should be no…

view full answer...

Answer 11

Installing an anti-sway bar at the rear of your truck may help control some of the trailer sway, but will not prevent trailer sway from happening. Installing a sway bar helps reduce the body roll and sway you will see on the tow vehicle, but does…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...