Customers compare RM-1139-173-00 to these similar products
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Thank you for the questions about the Roadmaster Rear Anti-Sway Bar and End Link Kit #RM-1139-173-00 for your 2015 Ford F-350 Super Duty. I spoke with my contact at Roadmaster who wasn't sure why they don't have specific instructions for the…
view full answer...Basically, one friction-style sway control can be used for trailers with up to 6,000-lb GTW. If your trailer's GTW is between 6,000 lbs and 10,000 lbs, you will need two sway-control units, one on each side of the trailer. You will also want to…
view full answer...The B355 endlinks that come with the End Link Kit for Roadmaster Rear Anti-Sway Bar for Pickup Trucks #RM-590170-00 have a center hole measurement of 14 inches, while the overall length is 15-1/2 inches. I've attached a diagram to illustrate. The…
view full answer...For your 2020 Ford F-250 Super Duty 4x4 I recommend the Roadmaster Rear Anti-Sway Bar #RM-1139-173 if you can reuse the current end links you have from the factory and save yourself some money. If you can't for whatever reason, maybe yours are…
view full answer...The stabilizer bar and brackets will be bolted inside the bed and the front anchoring plate will be bolted on between the bed and the cab. If you don't have enough space to get your hand and the plate between them then you'll have to unbolt…
view full answer...Though not required, you will certainly reap some benefits from installing an upgraded rear sway bar like the Roadmaster Rear Anti-Sway Bar and End Link Kit part #RM-1139-173-00 on the rear of your 2017 Ford F-250. The Timbren springs you already…
view full answer...Yes, the Roadmaster Rear Anti-Sway Bar and End Link Kit #RM-1139-173-00 would be the correct choice for your 2015 Ford F-350 since you don't already have a factory rear anti-sway bar in place. If you did have one in place you could just use the…
view full answer...We have replacement legs for the HappiJack truck camper systems like the part #LC736515 which has 36-1/2 inches of lift and a 2,800 lb capacity as well as the #LC736514 which has 34-1/2 inches of lift and a 2,200 lb capacity but the legs themselves…
view full answer...Because the SumoSprings #SSF-111-54 will always be engaged on your 2017 Ford F-350 the stock suspension will not compress as much as it normally would. This will give you the feeling that there is lift though it isn't actually lifting anything it…
view full answer...There are two levels of adjustment on the SuperSprings Custom Suspension Stabilizer and Sway Control Kit part #SSA46 for your 2017 Ford F-350. The adjustment is located on the shackle that attaches the roller to the bottom of your leaf spring. There…
view full answer...The Roadmaster Rear Anti-Sway Bar and End Link Kit part #RM-1139-173-00 is a custom fit for your 2015 Ford F-250 which means there is no drilling required. I checked with Roadmaster to confirm this for you. There are brackets welded to the axle for…
view full answer...The HitchMate TruckStep Extendable, Hitch Mounted Step for 2" Hitches - 9" x 6" - 500 lbs #HE4045 is the only extendable step we carry that reaches that far. We do have hitch extenders that have the step for that same purpose like the…
view full answer...