Will the Roadmaster Rear Anti-Sway Bar Work with Airbags on a 2014 Ford F-250

Question

Question:

Hello Can I install the road master 1139-173 on my 2014 f250 super duty 4wd when it has the lift master air bags installed on it?

asked by: Gregory

0

Expert Reply:

I am not familiar with Lift Master airbags but the Roadmaster Rear Anti-Sway Bar for Pickup Trucks part # RM-1139-173 which is a fit for your 2014 Ford F-250 is just a replacement rear anti-sway bar for the factory anti-sway bar so there should be no reason whatsoever that it interferes with the airbag kit.

I also took a look at some of the airbag kits we sell for your F-250 (Air Lift /Firestone) and none of them would pose any problems for an upgraded rear anti-sway bar like the Roadmaster Rear Anti-Sway Bar which you can see in the attached photo.

expert reply by: Conner L

0

click to enlarge

Answer 1

Yes, the Roadmaster Rear Anti-Sway Bar and End Link Kit #RM-1139-173-00 would be the correct choice for your 2015 Ford F-350 since you don't already have a factory rear anti-sway bar in place. If you did have one in place you could just use the…

view full answer...

Answer 2

Yes, the Roadmaster Sway Bar part #RM-1139-173-00 would work just fine on a vehicle that has Firestone air bags installed.

view full answer...

Answer 3

The Roadmaster Rear Anti-Sway Bar and End Link Kit part #RM-1139-173-00 is a custom fit for your 2015 Ford F-250 which means there is no drilling required. I checked with Roadmaster to confirm this for you. There are brackets welded to the axle for…

view full answer...

Answer 4

The B355 endlinks that come with the End Link Kit for Roadmaster Rear Anti-Sway Bar for Pickup Trucks #RM-590170-00 have a center hole measurement of 14 inches, while the overall length is 15-1/2 inches. I've attached a diagram to illustrate. The…

view full answer...

Answer 5

Thank you for the questions about the Roadmaster Rear Anti-Sway Bar and End Link Kit #RM-1139-173-00 for your 2015 Ford F-350 Super Duty. I spoke with my contact at Roadmaster who wasn't sure why they don't have specific instructions for the…

view full answer...

Answer 6

The Roadmaster Rear Anti-Sway Bar #RM-1139-173 contains the polyurethane bushings and mounting hardware to install onto your 2017 Ford F-250. The only extra item you would need is the end link kit. The sway bar and end link kit is available in one…

view full answer...

Answer 7

Going with a heavier sway bar on the front and rear of your 2014 Ford F-350 will help improve handling and stability when towing your fifth wheel trailer. For the rear you would want the part #RM-1139-173-00, for the front you would want the part…

view full answer...

Answer 8

Good question, and while we do have a rear anti-sway bar for your 2019 Ford F-350 Super Duty, the #RM-1139-173 is only for trucks that already have one, and there isn't a hardware kit that will allow installation of this anti-sway bar on a truck…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...