Recommended Vehicle Wiring Harness For A 2020 Toyota Highlander XLE

Question

Question:

How do I know which wiring harness will work with my 2020 XLE Highlander? I have the manufacturer window sticker. There is no mention of a trailer towing package.

asked by: Steve H

0

Expert Reply:

For your 2020 Toyota Highlander XLE you will need the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # TK99FR since your Highlander does not have a towing package.

This is actually the same 4-way connector harness as the one for vehicles with the towing package but includes a module to plug into your factory wiring to activate the harness.

I included a video of the # TK99FR for you to take a look at.

expert reply by: Samuel C

0

Answer 1

Though we do have hitches available for your 2022 Toyota Highlander AWD Platinum Hybrid, like the Curt #C45CR (which is the highest rated option), the largest spare that can be stored under the vehicle after an install will be 18". This is due…

view full answer...

Answer 2

I recommend going with a T-Connector wiring harness for your 2023 Toyota Highlander XLE: - With Factory Tow Package #C79VV - Without Factory Tow Package #C59496 The easiest way to determine if you have the factory tow package or not is to look at…

view full answer...

Answer 3

Yes, the Curt hitch part #C99FR does fit your 2023 Toyota Highlander. It fits the XSE, non-XSE, and hybrid models.

view full answer...

Answer 4

The easiest way to determine if your 2019 Toyota Highlander has a towing package with a converter is to remove all of the floor coverings on the inside rear of the Highlander. You will need a trim panel removal tool part #ALL648544 or a flat head…

view full answer...

Answer 5

Since you do not have the tow package on your 2023 Highlander you need the Tekonsha T-One Vehicle Wiring Harness #TK99FR. The Tekonsha is the best option since we have found them to be the most reliable when it comes to wiring. This plugs into the…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...