Can Trailer Brakes be Wired Directly to Brake Light Circuit

Question

Question:

Can I connect the trailer brakes to the trailer brake lights?

asked by: Albert C

0

Expert Reply:

If you connect the trailer brake light circuit to the trailer brake circuit your brakes would lock up immediately since 12 volts is max braking voltage for trailer brakes. You'd need a brake controller that can vary voltage so that you can apply the brakes in a smooth way. The Brake EVN # TK63VR is a great choice for this as it has an internal sensor that applies can tell how hard you are applying the vehicle brakes and applies a similar amount of brake pressure to the trailer brakes.

expert reply by: Jameson C

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

The horizontal mounting plate that mounts to the frame of your vehicle on the #41947 is 2-13/16" wide and the mounting plates themselves are 11-9/16" tall. The holes on the horizontal mounting plates are 3/4" and 1-1/4" in…

view full answer...

Answer 3

I reached out to Draw-Tite and found that the distance from the frame mounting point to the top of the receiver at the lowest setting is 10-5/16". Keep in mind, the Ultra Frame Trailer Hitch Receiver #41947 is only confirmed to fit C/K series…

view full answer...

Answer 4

There are traditional and standard wiring configurations and that can be frustrating when working with electrical connectors. We try to always remind customers to check wiring for function and not to rely on the color of the wires for that reason.…

view full answer...

Answer 5

Because the functions on a semi 7-Way connector are different than those in the RV industry a regular adapter would not work. Some of the circuits have to be combined so a converter is needed. It would actually be easier to just add an RV style 7-Way…

view full answer...

Answer 6

Although it is not required by law, what you are wanting to do is certainly possible. Because trailer tail light systems combine the stop lamp and turn signals for each side onto a single circuit, you will need to use a vehicle-to-vehicle tail light…

view full answer...

Answer 7

To install your Reese Pod brake controller in your 2018 Ford Explorer will require the install harness part #3035-P which is a confirmed fit. If you check out the 9:55 mark of the install video I attached to this page you'll see where to find the…

view full answer...

Answer 8

If your 2017 Ford Explorer has the factory prep towing package installed, then you might have a brake controller plug-in wiring on the vehicle to connect your brake controller. However, not all models with the tow package had the wiring installed and…

view full answer...

Answer 9

I do have an option for you but there isn't a traditional stop light switch circuit on a 2023 Jeep Grand Cherokee L. Therefore, if you want to use a wired trailer brake controller you'd need a stop light switch like the RoadMaster Stop Light…

view full answer...

Answer 10

On the 2015 Jeep Wrangler Unlimited the brake switch wire should be a white wire with a brown stripe. Use a circuit tester such as #PTW2993 to test the wire to make sure it is the one that only has power when the brake pedal is pressed.

view full answer...

Answer 11

Let's begin with the brake controller. Redarc makes a great product, but unless you plan on towing overland you won't ever need or use the user-controlled mode offered by the #RED44FR Tow-Pro Elite. I'd recommend the Redarc #RED24FR…

view full answer...

Answer 12

If your 2006 Chevrolet Silverado 1500 came with a factory 7-way trailer connector then you will not need to do any wiring to install the Pollak 7-Pole, RV-Style Trailer Connector Socket w/ Wiring Harness and Mounting Bracket part #PK11898. If this is…

view full answer...

Can Trailer Brakes be Wired Directly to Brake Light Circuit

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching