What Tow Hitch and Wiring Harness Will Fit My 2022 Hyundai Palisade

Question

Question:

I just bought a 2022 Hyundai Palisade. It has “pre-wiring” installed. I need to install a hitch and also a wiring harness. I would like a 4 pin and a 7 pin. Can you link me to the correct harness and hitch to get the job done? Thank you!

asked by: Danielle S

0

Expert Reply:

The hitch I recommend for your 2022 Hyundai Palisade is the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13427. I recommend this Curt hitch because it has a hidden design, meaning that all you will see is the receiver tube opening.

For the wiring harness, I recommend the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # CU94FR.

To get the 7-pin, you will need the Adapter 4 Pole to 7 Pole Vehicle End Trailer Connector # 30717. This will plug into your 4-pole connector, you will need to attach 2-3 wires. I have attached a video explaining what each wire need to be connected to.

expert reply by: Thomas M

0

Answer 1

What you can do to have a 7-way/4-way combo at the rear of your 2022 Hyundai Palisade is to start with the 7-way kit part #C68JR that you referenced and then instead use the 7-way/4-way socket part #30955 in place of the included 7-way and…

view full answer...

Answer 2

The Stealth Hitches Hidden Rack Receiver #391HYUNPALIS19 for your 2022 Hyundai Palisade is actually not meant to be used for towing. The receiver attachment is designed to be used only with hitch mounted accessories. Instead, you're going to…

view full answer...

Answer 3

Use the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package, #C68JR to quickly and easily install a 7-way, RV-style trailer connector on your 2022 Hyundai Palisade. This is a plug-n-play install but I do highly recommend, to keep the…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

We have both a trailer hitch receiver as well as the wiring you need for your 2024 Hyundai Palisade. I verified both fits directly with the manufacturer for you, and the correct parts are the following: - Curt Trailer Hitch Receiver #C13427 -…

view full answer...

Answer 7

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 12

For your 2024 Hyunda Santa Cruz we have the Curt 7-way kit part #C68JR that is a confirmed fit. This installs by plugging into a factory wiring connector on your vehicle which means a really easy install that doesn't require any splicing.

view full answer...