What Size Crossbars Does Inno Ridge Rooftop Cargo Box INBRA220R-BK Fit

Question

Question:

Do you have the size if the U bar fixings? - Space between the U threaded rod of each bracket/ fixing to holes on box. - Depth of U bars. I already have a Frontrunner roof rack, and need to check if the Inno box Ubar brackets can fix on to the slats. Thanks.

asked by: Chi

0

Expert Reply:

The U-bolt hardware of the Inno cargo box part # INBRA220R-BK that you referenced can fit crossbars that are up to 3-1/2 inches wide and 1-3/8 inches tall.

expert reply by: Jameson C

0

Answer 1

You're right that the Inno Ridge Rooftop Cargo Box - 8 cu ft - Gloss Black #INBRA220R-BK is contoured to sit lower around past the crossbars. This is for a more aerodynamic shape to cause less drag. Because of the way this cargo box mounts…

view full answer...

Answer 2

The Inno Ridge Rooftop Cargo Box #INBRA220R-BK will fit the OEM roof rack of your 2021 Tesla Model Y as long as the crossbars are between 20 and 30 inches apart. It looks like your spread is 35 inches though so a different box would be ideal like the…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 6

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 11

Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch #Y01126, 54 inch #Y01127, and 60 inch #Y01135 lengths. These tracks…

view full answer...

Answer 12

The Rhino-Rack Roof Rack for Factory Tracks #Y02-490B-NT is going to be your best bet for the tracks on the ARE topper for your 2012 Toyota Tacoma. The weight capacity is 220 lbs like you mentioned, but that's going to be the highest you'll…

view full answer...

What Size Crossbars Does Inno Ridge Rooftop Cargo Box INBRA220R-BK Fit

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching